Jump to content
SAU Community

Recommended Posts

Thought id share my project for both sharibg experience and gaining some.

I have a s1 4 door 33 that started life as an automatic 2.5t. It was converted to manual and imported in 2000. Since then whilst in the hands of the previous owner it snapped a rod and an epic 30det was built for the car. After several years of bad luck and skids the previous owner decided to part it out, i brought the rolling shell minus box, engine and radiator.

I have a s3 manual gx 31 that is my daily and shortly to be my donor car...

Next week im putting the rb30 box and engine into the r33... As a strictly budjet project.

Ill be posting up some pics as i go as well as sharing pointers about.interchangability that i come across duribg this rare and retarded conversion... With 4.36 diff gears however im sure it will be interesting.

Link to comment
https://www.sau.com.au/forums/topic/359101-the-4-door-gts25t-with-an-rb30e/
Share on other sites

aha , it was you that bought it! , nice :) , are you planning on rego? might want to check with authorities before putting the rb30e+t? in to make sure it can be done . A friend of mine tried putting an older motor in a car he was building and found he couldn't get it passed for rego ( just a heads up :) )

Technically patrols came with rb30s untill slightly after the r33 was made... So it should be ok on paper... Its currently regoed with a 25det. I dont plan on changing it to be honest. If push came to shove it could be engineered without a problem. I had an engineer approve a 95 vs commodore with an rb25det s1 engine from an earlier 33.

Conversion starts on sunday but ill put up some pics soon.

At this stage i dont think ill turbocharge however ive been dreaming of supercharging, response and torque is the aim here but so is keeping to a very low budget. Have to see if it spins the 245`s on the back lol.

Ahh yep , didn't know it was still rego'd , all sweet then! :ph34r: . rb30 will love 4.3 diff gears and 245s! , i doubt you'll need a supercharger for response . I was gunna buy this car myself but couldn't find anywhere to put it (when i did it was too late :P ) . what you doing with the leftover bits of r31?

Ahh yep , didn't know it was still rego'd , all sweet then! :ph34r: . rb30 will love 4.3 diff gears and 245s! , i doubt you'll need a supercharger for response . I was gunna buy this car myself but couldn't find anywhere to put it (when i did it was too late :P ) . what you doing with the leftover bits of r31?

the left overs are being given to Phil Parnell for payment, hes the one doing the conversion for me

conversion under way:

exhaust, im please to say, lined up perfectly

gearbox cross member was not interchangeable

tail shaft was not interchangeable

r31 radiator does not fit, its too tall.

all ancillaries bolted up, inc air con.

wiring yet to be done

Ha ha ha... nice one.

Throw a lumpy cam and some more compression at it (along with the right exhaust) and get a really unique sound for a 33.

Good luck

Justin

Edited by XRATED
  • 2 weeks later...

Updated: r33 n/a tailshaft fitted, so did the standard r33 gearbox crossmember. The wiring was litterally 4 wires at the ecu side using the whole r31 engine loom with the r33 relays. Ended up chopping off the r31 altenator plugs and using them on the r33 body loom.

I have not hooked up the speedo or tacho yet but i have a jaycar speedo corrector mk2 that im hoping will work to correct the change in diff ratio.

Ill post up some vids and pics over the easter break

update: speedo worked with the speed correcter, massive 40% difference due to gearing! lol simply used 12v+ from r33 gearbox loom, made an earth and then ran the signal wire to the cabin to the adjuster and then straight to the back of the dash. FYI, for those using a Jay car speed correcter MK. 2 with an r33 you need to use the 8.2v JP1 setting and then use the AC JP5 setting... should work a treat!tacho cannot be driven by the stock tacho output from the r31 ecu, i will most likely piggy back it off the CAS or i will make some kind of relay style circuit to convert the signal to run the tacho

post-33471-0-25889900-1303296121_thumb.jpg

post-33471-0-73908800-1303296137_thumb.jpg

post-33471-0-30323100-1303296155_thumb.jpg

post-33471-0-35966700-1303296172_thumb.jpg

post-33471-0-37836300-1303296189_thumb.jpg

post-33471-0-79939700-1303296206_thumb.jpg

post-33471-0-14174900-1303296223_thumb.jpg

post-33471-0-60202000-1303296240_thumb.jpg

post-33471-0-01755400-1303296256_thumb.jpg

post-33471-0-30132900-1303296272_thumb.jpg

Im happy with how it performs. With the short gearing its nice and zippy. Feels very flat but as soon as you stomp it the powers there. Took down my mates auto s-vz no worries. Im thinking of keeping it na but tuning it to push the peak torque up the revs a bit just to make it a bit more powerful. First thing ill be doing. Besides a general tiday up and maintenance is a nistune ecu and some dyno time.

Before you get it tuned bang a cam and extractors in it.... One of my r31's many many many years ago, we threw a cam and chip (allready had extractors) at her and she really came alive.

I recently saw a shot on here somwhere of a rb25de manifold with twin tb's.. Similar to the 5lt walkinshaw manifold. There may be something in that too.. I'd be tempted to go two 50mm vg30 tb's. Or even try adapting a gtr intake set up to the 30??? Very unique either way.

post-22624-0-02779700-1303451703_thumb.jpg

You comming to the track day?

Cheers

Justin

Edited by XRATED

that looks a whole lot like Skitr31's engine bay! 150rwkw running an rb25det tune... noice

at the moment cash is tight so i wont be coming to the track day unfortunately.

im unsure what way to go yet, boosted, n/a 30e head or n/a 25de head... either way the car needs a tidy up before i start blowing wads of cash on making it go fast!

30e+t , if your aim is under 300rwk , nice and simple (and cheaper )

That's what I said at the track day... today.

Nice simple precision billet 5557 with wastegate and manifold adapter. Nistune, VL-T injectors etc...

J.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...