Jump to content
SAU Community

Recommended Posts

So i have a couple of things to go for R33's

- Whiteline non-adjustable 24mm front swaybar, part no- BNF24, with poly D bushes. Bar is fine, some paint scuffing and marking from being on the car but no dents or damage at all. D bushes are Whiteline items and still in vgc. Reason for sale is I have bought an adjustable version of the same bar as I plan on doing some track work and am after more fine tuning of the suspension. After $95 plus postage for this one. Happy to send a pic if you need.

- front and rear KYB Excel-G struts, with new bump stops/dust boot kits. These are one step from brand new, just installed them on 22/03/11 and done about 100k's on them at the moment. Reason for sale is same as above, have changed plans for the car and looking to do track work with it, and these won't be firm enough for that, although are great for street/daily driving. Looking for $750 plus postage for the lot of these.

PM me if you need any further info, thanks.

Link to comment
https://www.sau.com.au/forums/topic/359162-r33-suspension-stuff/
Share on other sites

Cairns, 4870. Struts cost me $35 to get here from Brissy, just as an indication of postage cost...can get a quote for anyone interested though obviously.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...