Jump to content
SAU Community

Recommended Posts

Ok, I've been looking at getting some new wheels. I've noticed these APEC Apache wheels which are cheap as plus I like the styling.

So what I'd like to know is would 19" hinder my handling and rub on the guards? Also is 8" wide enough?

Cheers

http://cgi.ebay.com.au/18inch-New-SHADOW-CHROME-Deep-Dish-Apache-Wheel-Tyres-/290550805779?pt=AU_Car_Parts_Accessories&hash=item43a62d7513

Ok, I've been looking at getting some new wheels. I've noticed these APEC Apache wheels which are cheap as plus I like the styling.

So what I'd like to know is would 19" hinder my handling and rub on the guards? Also is 8" wide enough?

Cheers

http://cgi.ebay.com....=item43a62d7513

With 19 inch wheels, you will definitely need to lower it abit.

19x8 should be fine. One of my friend with a R34 GTT coupe tried on to buy these wheels (19x8.5 +35 (Front) on 245/35/19, 19x9.5+35 (Rear) on 275/35/19). Rear wheels were sticking out alot and needs guard rolling.

I am not sure about handling and rubbing issue.

The wheels look good. Good luck.

Edited by VNS 24

19x8 should be fine. One of my friend with a R34 GTT coupe tried on to buy these wheels (19x8.5 +35 (Front) on 245/35/19, 19x9.5+35 (Rear) on 275/35/19). Rear wheels were sticking out alot and needs guard rolling.

... 245/35/19 would be an illegal tyre size with 20mm increase in overall diameter - 3.1% speedo inaccuracy. The correct size here would nede to be 245/30/19 or 225-235/35/19.

Worse, 275/35/19 is crazily stupidly illegal with a 40.8mm increase in overall diameter, causing a 6.4% speedo inaccuracy - which would very likely have contributed to the cause of rubbing. A more appropriate size would have been a 255/30R19 for keeping legal.

I honestly don't understand how a tyre shop would even allow these illegal fitments.

Given the size/cost of tyres, and the compromise in how it's going to feel on rough Australian roads - 19" sounds like a crazy idea to me.

... 245/35/19 would be an illegal tyre size with 20mm increase in overall diameter - 3.1% speedo inaccuracy. The correct size here would nede to be 245/30/19 or 225-235/35/19.

Worse, 275/35/19 is crazily stupidly illegal with a 40.8mm increase in overall diameter, causing a 6.4% speedo inaccuracy - which would very likely have contributed to the cause of rubbing. A more appropriate size would have been a 255/30R19 for keeping legal.

I honestly don't understand how a tyre shop would even allow these illegal fitments.

Given the size/cost of tyres, and the compromise in how it's going to feel on rough Australian roads - 19" sounds like a crazy idea to me.

I don't know about the legal fact with the R34 GTT. The wheels were off from a V35 coupe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...