Jump to content
SAU Community

Recommended Posts

I bought these headlights from the states around 6 months ago. Very good quality headlights and those leds on the side are very bright even during the day. I am selling this pair because I just bought another set with matt black housing instead of chrome. I bought these lights 6 months ago for $650 including postage. Pm me a price which you think is fair....if the price is right these headlights are yours.

p.s This sale is for headlights only it doesn't contain the Hid bulbs or ballasts.

ywu3tfso4vzq44kxwv_thumb.jpg

whacygkkuh9h59w3is_thumb.jpg

7zhqt1m27bfofdf74sky_thumb.jpg

mate, as per forum rules, you will need to state a price.

also, are the lights angled for left hand drive? i.e. right ( drive side) fires upwards and the passenger side is tilting lower?

I didnt know theres a rule.... sorry.... but I am chasing somewhere around the $375-$400 mark.... also you can adjust them using a screw driver....I just installed them as they are.... cant tell the different between the oem one... except the projectors can focus the lights alot better....

Edited by bosco

Where abouts are you? I'd like to check them out..

I'm pretty sure as they are US lights no amount of adjusting can make them suitable for australian roads.. But i wouldn't mind checking them out at night

I am in Epping sydney.....

Best thing to do would be take a photo of your car with your headlights facing against a wall, you will be able to see the beam cut off pattern on the wall.

Yeh I have taken the lights off the car already....in this youtube link they show the details etc.....where the beam are aiming etc....http://www.youtube.com/watch?v=E4o_oySbbVw

Hahaha bosco mate! Need to catch up soon, good luck with the sale!

And for anyone who's wondering what they look like at night, I've seen them in person and they are actually pretty sweet!

Edited by ModaFUR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...