Jump to content
SAU Community

Recommended Posts

Going for a little drive on Saturday, weather permitting, PM me for more details if your interested

Saturday, Saturday, well im working till 11:30 Could be keen if the numbers are there... if we could get one, two, three more people thatd be awsome :P

black 33 on west st last night sporting SAU QLD stickers. Running a bit rich by the smell of it ;)

spotted your 34 at the uni today up the little entrance bit and a silver 33 near dan murphies...

spotted your 34 at the uni today up the little entrance bit and a silver 33 near dan murphies...

spotted a r33 4 door with p plates on it on west street on my way home from work

Saw the illustrious black 33 this morning again, turning onto James off West. Return my wave damn it! pinch.gif

the matt black one with the orange wheels? haha dw about it man we'll always wave back to you lol :banana:

nah this is another one I keep seeing around. Female driver methinks :ph34r:

black r33 with KAT... plates?ph34r.gif, and it's not classed as stalking if you have a business card

hi mate im Metib i have Matt black r33 with orange wheel i wanna know the detalis about the cruise plz

To all you Toowoomba guys lurking, there is a cruise to plainlands happening this Sunday, PM me for more details

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...