Jump to content
SAU Community

Recommended Posts

Don't forget the filament inside the AFM.

You'll need to remove it from the intake and physically spray the heating filament/element of the AFM until its clean of all oil/dirt/dust.

Cleaning this will be more important than just the contacts on the plug.

Should your AFM have no mesh on the ends (unlikely), try not to physically touch the filament bit.

I gots a strange feeling your economy will jump 100ks or more with just AFM cleaning and new O2 :)

So I'll have to clean that with the contact cleaner as well? I know its got mesh at one end, not sure about the other.

I will be very happy if it does haha

Yeah...electrical contact cleaner on the filament/element as well.

Do not use carby cleaner. While this works good, it leaves a residue*** and you will be back to square one LOL

***subject to debate. some say it does, some say its all good but why risk it when for $13 a can at repco this week, you can get electrical contact cleaner :P

May I also suggest new spark plugs...your current ones should all be sooty from the over fueling. Best to do all in one hit so wait for your O2 to arrive.

Lastly, wet weather = car stays safely in the garage ;)

Went to work myself.

The show's over-rated and very expensive nowadays to get in...unless you love dagwood dogs and $10 cans of coke.

True, I haven't been to the show since I was in grade 3/4 and no real desire to. Work public holiday and get a free day off in July for the Nissan time attack day at QR= WINNING

  • 2 weeks later...

Details for Sunday please :)

Not sure as of yet but would like to know anyways.

Wife says as long as we don't get up to anything stupid, I should be OK to go if nothing comes up..... :unsure:

Edited by me_larr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...