Jump to content
SAU Community

Recommended Posts

How do I know what size I need? Measure the back of the turbo and the size of the exhaust?

Does that even make sense? Lol

Edited by A Grave Digger

We will probably be organising another dinner out at Ipswich in the coming weeks for you Toowoomba guys. Any of you interested or is it a waste of time?

Yep I'll come down for a feed and chat

I could be keen, shotty lift so I can drink

Shotty a lift also

Nope it's a t70 on a 25 neo motor in a 32 sedan

Have a search here on the forums or google to see what other people with that turbo are running. Plenty of aftermarket dumps getting around surely there would be something out there and would be cheaper then getting one made up.

March happy laps is on the 24rh of march. Afters which we are holding the agm. If we were to then cruise on down to Toowoomba and see what your city is like, would you guys be keen? Have lunch at a pub somewhere etc.

Why not make it the 24th. :)

This one is more about getting drunk and talking bullsh*t then cruise

Sweet, in

Of course you would be, you are always keen

24th of march.

Where is it going to be at?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...