Jump to content
SAU Community

Recommended Posts

Really?

*You're

Yeah I am pretty sure most base white colours don't have a clear coat. I could be wrong though. I have mixed up a ton of touch up paint for cars at work and all the white ones I have done that hasn't had pearl or metallic through it I have never had to add clear coat.

I am too angry for correct spelling!

Quiet in here, getting keen for some cruising on the weekend :)

Can't wait myself unluckily for me on the way to work my tyre blew some how threw the clamp off the cv boot and snapped the sway bar bolt..... Luckily a mechanic Is next to work and will be fixed this morning ha

Can't wait myself unluckily for me on the way to work my tyre blew some how threw the clamp off the cv boot and snapped the sway bar bolt..... Luckily a mechanic Is next to work and will be fixed this morning ha

Nice I'm trying to get a driver, if not ill be in the hatsu and (as yet unconfirmed/asked) rolling with captain slow

How many do you know of from toowoomba besides me

There is myself, tom, clint, natro nick and 180 nick. There are about another 10 that I know of but don't want to do meet ups

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...