Jump to content
SAU Community

Recommended Posts

There is myself, tom, clint, natro nick and 180 nick. There are about another 10 that I know of but don't want to do meet ups

& 180 Nick isn't allowed to come for this one cos he's not a skyline owner, right?

Just so you know:

My brakes and hubs are off a skyline.

My vehicle security was done by one of your own.

The father in law used to drive a Hakosuka.

Do these count?

What if I rock a GT-R badge on the front and back? :D

Bah, I'll be working anyway :P

Spewing I can't even tag along with someone...

Post up lots of pics in here or somewhere on the SAU mother forum, please. That's all I ask.

You can bring a 180 if you want...we let Tony come in his Maxima :P Only event we run that is vehicle specific if the Charity Cruise. I would rather an SR powered 180 (or even *shudder* a CA powered one) over a 33 with an LS1.

  • Like 1

You can bring a 180 if you want...we let Tony come in his Maxima :P Only event we run that is vehicle specific if the Charity Cruise. I would rather an SR powered 180 (or even *shudder* a CA powered one) over a 33 with an LS1.

Nick ditch work and bring the 180 :yes:

& 180 Nick isn't allowed to come for this one cos he's not a skyline owner, right?

Just so you know:

My brakes and hubs are off a skyline.

My vehicle security was done by one of your own.

The father in law used to drive a Hakosuka.

Do these count?

What if I rock a GT-R badge on the front and back? :D

Bah, I'll be working anyway :P

Spewing I can't even tag along with someone...

Post up lots of pics in here or somewhere on the SAU mother forum, please. That's all I ask.

Buy a dodgy bread roll from Nicks bakery. Get the sh1ts. Bail on work because Straylan Day!

Sorry guys, I really couldn't ditch work. Made a promise.

Now if I had made a promise to turn up for the cruise, I would have, by hook or by crook. :)

Where's my pictures, ppls???

How many turned up? (especially the tbar crew LOL)

What sort of cars?

Did everybody get to do a blanchview? (downhill touge ftw)

That was a good cruise ;) And the feed was quite the nom noms too! Too bad most of the cruise was spent at red traffic lights tho :P

For sure gd to finally meet everyone. I ended up going to esk, btw what should my oil temp be hovering around ? It was almost on 150 degrees that bad ha?

Yeh it sure was - as always, we need more cruises ;)

Um oil temps for most cars should be around 80-100 degrees - that's what the oil is designed for.

Yeh that sounds a bit excessive there Brian, especially seeing that your engine temp is meant to be around 80-85deg (basically the same as what the oil is designed for)

You may have to check all your cooling systems...

Yeh it sure was - as always, we need more cruises ;)

Um oil temps for most cars should be around 80-100 degrees - that's what the oil is designed for.

Yeh that sounds a bit excessive there Brian, especially seeing that your engine temp is meant to be around 80-85deg (basically the same as what the oil is designed for)

You may have to check all your cooling systems...

Thanks mate. Argh more money ha so annoying

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...