Jump to content
SAU Community

Fs: Rb25 Hiflow Turbo, Full Exhaust System, Wolf 4+ Ecu & Other Items

NutR33
 Share

Recommended Posts

NutR33 Community Regular

NutR33

Posted
Posted

Hi Guys,

I've got my R33 GTST turbo, exhaust and computer for sale due to upgrades. It has been making 300kw for about the last 3 years and is still on the vehicle so happy to take take potential buyers for a drive. I plan to remove parts in about 1 months time when the new set up is ready, but willing to remove them earlier if sold prior to new set up arriving.

Can package and post at buyers expense, though prefer pick up on exhaust, located in Shepparton- North East Vic.

Please PM or call me on 0437 688 773.

TURBO -

R33 Hi flow turbo with OP6 rear housing.

HKS 14 psi wastegate actuator

Will bolt up to standard oil and water lines, dump pipe and intake.

The turbo was originally built by ATS in Adelaide with special exhaust and compressor wheels, not the normal hi flow wheels.

The OP6 housing was machined and fitted by Kyp at ATP in June last year and the turbo was checked over at that stage.

Turbo makes full boost by 3200-3400 RPM and is capable of 20+ Psi.

$1500

EXHAUST

3 inch CES racing split dump pipe with 2 O2 sensor ports.

3 inch gutted cat.

85mm cat back system with centre muffler and rear cannon with a 5 inch tip.

$500

COMPUTER

Wolf Version 4+ wire in

This computer is the 4+ so it has extra ignition drivers, compared to the plug in unit.

The computer comes with 30cm of loom, hand controller, instruction manual, ECU to laptop cable and software to be able to plug in and tune on your laptop.

Being a wire in unit it will suit all makes and models of vehicles, not just skylines.

$1000

Will sell Turbo, Exhaust and ECU as a complete upgrade for $2500

R34 GTR WHEEL CENTRE CAPS

Original paint in average condition.

$50

N1 GTR MAIN BEARINGS

Main engine bearings to suit R33 GTR (possibly all RB engines)BRAND NEW - Only have marks where we measured them up

Genuine Nissan parts

6x Main bearing sets

1x Thrust bearing set

These were purchased to fit my engine but we found that they were the wrong size for my engine.

If you refer to the Nissan workshop manual there are different sizes available, these are the black ones

$20

STAGEA_KING Enthusiast

STAGEA_KING

Posted
Posted

hey mate,

what else you got on the car for 300kw and the boost level you are running?

will the computer fit on auto?

how much does it cost to tune?

NutR33 Community Regular

NutR33

Posted
  • Author
Posted

hey mate,what else you got on the car for 300kw and the boost level you are running?will the computer fit on auto?how much does it cost to tune?

The boost was set to 21psi for 300Kw, the car has usualy suporting mods, intercooler, GReddy plemun, 850cc injector, cam gears.

The ECU will not run an auto trans but it could be used as a piggy back to the std ecu with the wolf controling the engine and the standard ecu controling the auto.

Im guessing it would be around $500 to tune, maybe a bit more the first time to set up all the calbrations for the sensors. Best to ring a tuner/workshop to find out

does the wolf come with a hand controller??

Yes the Wolf ECU comes with the hand controler

  • 1 month later...
  • 3 weeks later...
NUTWGN Proficient

NUTWGN

Posted
Posted

Hi Guys, Just an update price drop, all are negotiable. PM NUTR33 or myself if interested.

TURBO: $1200 ONO

WOLF ECU - $900 ONO

GTR Centrecaps - $40

Exhaust - only dump pipe and cat still available $250

N1 GTR main bearings - make an offer

  • 4 weeks later...
  • 2 weeks later...
NutR33 Community Regular

NutR33

Posted
  • Author
Posted

The Wolf ECU is a good all round ECU.

It has extra features over a power fc as it has programable outputs.

Thermo fans or anything else that you want to turn on or off can be set by any of the inputs, ie by revs, temp, boost.

You can run a wide band oxygen sensor with a display on the hand controler to check your tune while driving.

Im upgrading to the new Wolf ECU as i want some of the more advanced functions like launch control and anti-lag.

Cheers

Luke

  • 3 weeks later...
  • 2 months later...
NutR33 Community Regular

NutR33

Posted
  • Author
Posted

Hi Guys, Just an update price drop, all are negotiable.

WOLF ECU - $600 ONO

GTR Centrecaps - $40

Exhaust - $350

N1 GTR main bearings - make an offer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...