Jump to content
SAU Community

Recommended Posts

i heard that older bmw's stuff up alot ? any BMW above 5 years has alot of problems

Find yourself a tow truck driver and ask him the most common marque he picks up and I bet it'll be BMW closely followed by Mercedes.

German reliability my arse.

Find yourself a tow truck driver and ask him the most common marque he picks up and I bet it'll be BMW closely followed by Mercedes.

German reliability my arse.

I agree with BMW being very high maintenance, have owned a few of them and have always had problems, if your are looking at a e46 coupe make sure you have the sub frame checked as these are known to crack especially the 323ci/328ci,

Mercedes and Audi have been pretty reliable, some of the cars i have had have done over 300,000 ams without major problems

Toyota/Lexus id say would be less hassle but don't really have the style of a benz etc

That is very true (basing the info for the 3 series) - plenty of design flaws from the beginning.

I suppose the only way around this is to find a BMW that has been always serviced by a BMW dealership at the correct intervals - as most of the problems would have been fixed. Usually these cars cost much more. There is no such thing as a "cheap" bmw.

iseekool is not far from the mark

Beemers are renowned for being able to plant themselves thru corners at speed and not waste fuel in the process

Since you live in the Sydney area, and if you're considering BMWs

* BMV Engineering Ph 9526.1855 at Taren Pt > Massimo is a specialist technician and great diagnostician who won't charge an arm and a leg if you decide on a Beemer

* BMWise Ph 94381669 at Artarmon > George is also meticulous and reliable without charging like a dealership

Had a E46 328Ci without problems > Have a E39 530i without problems

Our Previous Beemers had temperature/water pump/sidetank problems.

M5=awesome, but I've done some research having considered one myself and I think you'd find either E34 or E39 will be high maintenance and need a lot of attention to keep in tune.

As Terry said we've had plenty of bimmers in the past and they've been a mixed bag. All of them were six cylinders and that would be the only way to go. I've had two 325s and a 328ci before and all 3 have been good fun.

An E39 525 or 530 sport would make a great cruiser but they're auto only. Being a 5, depreciation means you could get yourself a lot of car for your money though. I know many criticise the reliability of bmws, but the E39s really were well screwed together. The cooling system *is* an Achilles heel however.

3 series would probably mean E46, still a great shape and longer scheduled servicing intervals than both te previous E36 and E39. As someone said, rear subframe cracks were a common problem. Being used to the power of your GTR I think you'd find a 323i or Lexus IS200 quite slow... A 325, 328, or 330 will offer good poke, about 7.5, 7.3, or 7.0 sec flat to 100kmh respectively for the steptronic sedans. See if you can score an '01 330ci coupe or 330i sedan which will have xenons, sunroof, leather sport seats, 17s, leccy seats with settings memorised in the key, cruise, and other nice stuff. If you can get one with sat nav that'd be a bonus as they changed from being std fit in 328ci to an option for 330ci. 8 airbags are standard for the e46.

For reference, the W210 E class of similar era were renowned for breakdowns while the equivalent BMW E39 has proved significantly more reliable. Around this time, mercedes were undergoing significant expansion in production and introducing new models, subsequently letting their quality standards slip. They've recently worked hard to turn this around

As another option a v35 would be like a budget version of a BMW coupe; you could also go an R32 Golf?

  • 1 month later...

Everything you read in mags about them is pretty true. They ok, one dimensional, but ok. I wonder how the suspension and steering bushes are coping 5 years on though.

f**k BMW out of warranty. f**k all Euro actually. And f**k gutless Lexus IS200 too! Lol, making friends aren't I :)

Have you mentioned a budget somewhere I haven't seen?

I'd probably buy the best XR6 Turbo my budget would buy. Service and repair costs will easily outweigh any perceived lack of fuel efficiency.

German reliability my arse.

It must be from people who either bought their Mercs back in the 80's, or can't believe they spent so much on so little and delude themselves even further to think they're getting actual value (rather than just the perception of it).

Modern Mercs are a shade of their former selves, BMWs have always had electrical issues, and VWs shit themselves on a regular basis too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...