Jump to content
SAU Community

STR Cam gears

ned
 Share

Recommended Posts

ned Enthusiast

ned

Posted
Posted

HI,

HAs anyone tried these STR cam gears, they are US made, and alloy like the HKS, but seem reasonably priced ($200 ea at UAS). Anyone have opinions ?

".........570 pro gears

taking the cam gear to a new level...these new cam gears adhere to strict RMA standards, meaning they are designed with a special tool so each tooth is precisely matched to the oem timing belt. each gear made from billet utilizes aircraft grade black oxide 1/4" 12 pt bolt s and washers to ensure NO SLIPPAGE under any circumstance. The gear is then anodized with str's exclusive bronze flavor and then finished off bearing the mark of the str trademark . nothing even comes close to the technology we have invested in these remarkable cam gears:.....

http://www.strspeedlab.com/strcamgearintro.htm

Edit: Looks like they are easy to set up too

http://www.strspeedlab.com/adjustingyourcamgears.htm

Cheers

Ned

Link to comment
https://www.sau.com.au/forums/topic/36149-str-cam-gears/
Share on other sites
benm Grand Master

benm

Posted
Posted
nothing even comes close to the technology we have invested in these remarkable cam gears:.....

Ahh gotta love the marketing department of companies :slap:

I ordered a 'Trust' Cam Gear from Nengun last week and think it was about ~$180 delivered (and their were other brands available at a cheaper price - HKS = $141).

Link to comment
https://www.sau.com.au/forums/topic/36149-str-cam-gears/#findComment-724479
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ShezzDogs
      R34 Skyline Sunroof Won't Tilt/Vent

      By ShezzDogs · Posted

      Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      the top black section is bonded to the silver section with some form of rubber. I assume to isolated NVH from the box
×
×
  • Create New...