Jump to content
SAU Community

Recommended Posts

Hi,

I may have the chance to go to europe for an (hopefully) extended period of time and if so would buy a car, namely a TVR T350c

I would want to bring it back,

Anyone know how bringing in one of these beasts can be done?

Rough costs? Hoops I need to jump thru?

Many thanks for any help and understanding :)

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/
Share on other sites

TVR's are the go for personal imports, no problem to register have done a couple over here. High maintenance car with issues but worth a big dollar over here compared to UK prices.

I have had dealings with the person approved under SEVS as he wanted to import under RAWS which wont happen but learnt a lot about them.

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770107
Share on other sites

Cool, ok so a TVR can be done..

My basic browsing of the standards suggests I have to own the car as an ex pat for 12months?

It would be a personal import and I would be in europe for a while but 12 months is a bit to long to be sure if it is worth investing in the car when I get there

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770192
Share on other sites

Pretty much any car can be done with a personal import. I imagine it's the same procedures required in Japan. DOTARS will need a lot of documentation - you're lucky in that you won't need to have any of it translated. You are only allowed 6 weeks out of country where the car is...any more than that you will need to provide legitimate reasons for, and it gives DOTARS grounds to knock you back.

Once you get it back in Oz, you will have to go through the steps of getting a personal import plate from Victoria, and have a workshop fit it, as well as fixing some minor safety stuff.

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770249
Share on other sites

Ok, so far so good,

Car would be purchaced in the UK before or on arrival, I would tour europe with it and have any work done by TVR specialist before bringing it back, would it be an issue if I moved the car to asia for 6months? It would be with me the whole time is what I am saying I guess

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770259
Share on other sites

No...have you read the DOTARS site yet?

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/importing_vehicles/general/personal_imports.aspx

Particular the links on the right, Eligibility Criteria first:

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/importing_vehicles/general/EligibilityCriteria_2.aspx

Purchase documents will have to be in your name. UK might have a different arrangement to Japan due to being so close to EU, but I doubt you could move it to another country, unless you are just taking it for a weekend to Nurburgring or something. It has to be in the country for 12 months, and so do you (with only a few exceptions).

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770264
Share on other sites

Yep I've browsed the criteria its just I am not 100% sure I can be in the UK for a full 12months,

The way I read the criteria the car needs to be rego'd etc and available to drive but doesnt state it needs to be in the same country for the entire 12months. (As long as it is with me and available to drive?)

Depending on finances I would want to be in the UK/Europe for a minimum of 6 months then Vietnam for 6 months.

I guess I should ring them and clarify, a T350c + 4.3L rebuild will come in at around $40k AU, I dont want to get this wrong lol

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5770473
Share on other sites

It's fine to leave the country during the 12 month period. If it's longer than about 10 days, then you'd need to own the car longer to make up for any time spent overseas, but that's only if you don't use the car during that time.

Link to comment
https://www.sau.com.au/forums/topic/361511-importing-a-tvr/#findComment-5771877
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is the GTR fuel pump. Yellow shows 12V, orange shows earth. The ECU provides the earth to activate the fuel pump relay. The ECU side of teh relay will pull low when the ECU activates. This is the RB20 fuel pump. Almost the same, but a little simpler. You can see I indicated (above) where the 12V line goes down to the RB20 diagram on the overall diagram, whch shows both RB26 and RB20. This is where I show it coming in on the RB20 diagram below. You can see that the dropping resistor is handled differently. When the fuel pump control is not providing earth to the pump, the pump earths through the dropping resistor and thus runs at lower voltage (some is wasted over the resistor) and runs slower. I showed that "not 12V and not quite earth" portion of the wiring in a paler orange. The rest of the wiring that I did not colour on that little section below the pump would be orange when the fuel pump coontroller is providing earth. This drop is handled inside the fuel pump controller in the GTR. Regardless, you can see where 12V is supposed to be, where earth is supposed to be. The key on prime is via the ECU providing the pump for only a few seconds the switching off. You should be able to see that happen.
    • Yeah so when you turn key to IGN the fuel pump should run for a few seconds. If you find the fuel pump relay (and have a multimeter, and a second person) to can check the relay inputs.  One trigger pin should be either fully earthed  The other trigger pin should get 12v from the ECU for say 3 seconds when you turn key to IGN, and at all times that key is at START (note, I said this from memory, it may be the other way around, ie one pin always has IGN 12v and the earth has continuity to earth when you turn the key) One Pin should have a good battery voltage The last pin goes to the fuel pump + Also note that if the power to the relay is good, and the relay is working, it is worth checking the pump has a good earth too. There is a computer in the standard system that increases the earth resistance to slow down the pump when not required, pretty old school and it may have failed
    • All this talk about fuel and fancy ECUs, meanwhile my poor old R32 has neither.... When the ignition is turned on, should there be power running o the fuel pump constantly or just for the few seconds it usually takes to prime the pump? About to go have another look at it, have watched some YouTube vids on how to use a  multimeter and looked at some wiring diagrams but really have NFI what I'm looking for because electricity is invisible  
    • Yuh....but weren't all the supertourers, except maybe the Audis, FWD? I don't recall any of the others being AWD.
    • They ran them in Oz Super Tourers too https://www.supertouringregister.com/register/vehicle/212/ (I'm so old I remember racing with Matthew Fox) They ran them in Oz Super Tourers too https://www.supertouringregister.com/register/vehicle/212/ (I'm so old I remember racing with Matthew Fox)
×
×
  • Create New...