Jump to content
SAU Community

Recommended Posts

Let us know how the Gizzmo gos once you've got that installed/tuned. For $300 you can't go wrong... well you can, but not if it's good.

I'll report back after saturday when it gets installed, boost set then the pfc retuned for the boost curve.

Like i said, not expecting peak power gains but a better mid range. I did heaps of reading and finally settled on the Gizzmo unit. My choices were Greddy Profec B II, HKS EVC, HKS EVC-S, Blitz Dual SBC ID3 and the Gizzmo.

I've had the Greddy Profec B II before and it was a great unit (on another car) but thought i'd try something else this time. Was going to get the Blitz unit due to Status' quote below but in another thread he mentions he finds no difference in boost ramp rate between the Gizzmo and the Blitz dual solenoid so i decided to save the 300 bucks cheers.gif

Quote from Status

Any Blitz dual solenoid in my experience works the best (gain wise), i have plenty of graphs i could post up but i rate the boost controllers as follows;

1. BLITZ dual solenoid (type R, ID, IDIII or I-color) But i find the i-color is a bit too gadgety.

2. Gizzmo MSIBC (black with blue display) (awesome controller with closed loop boost control and cheap)

3. TRUST Profec b SPEC 2 (great controller, easy to set up)

Yeah you gotta watch out for those, not having enough experience to pick them out I just steer clear of eBay. I might just skim through every now and then to see what an average price for something is but chances of me actually buying something from there are slim to none.

Had my gizzmo ms-ibc installed and set today. PFC didn't need a retune as the boost curve change wasn't drastic.

What can i say, easy to use and install (though i didn't do the install as i was lazy haha).

Had the thing perfectly set in about 10 shootout runs and that includes a few muck around ones too. Once you get used to the instructions, it's piss easy to use.

Holds boost a wee bit better than my old PFC boost controller kit did, and boost comes on better thanks to gain settings. My power curve through mid range basically lifted up about 12rwkws. I also now no longer have time to make a coffee when i shift gears and give it a little.

Curiously picked up a few kw's peak power too even though running pretty much the same boost. It shouldn't be dyno variance as my last tune was 241rwkw, and then i de-tuned it further myself on the road to avoid some intermittent knocking.

Really like the unit, the only thing missing is probably overboost cut in my eyes (it only has overboost warning).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...