Jump to content
SAU Community

Bull Bar On A Stagea?

ian

By ian,
in Four Door Family & Wagoneers

 Share

Recommended Posts

ian Experienced

ian

Posted
Posted

I've just shifted into a new house (Yes! Off street parking for more cars! :-) ) and one of the things I'm going to want to do is get long bits of pipe home (light weight plastic). I've been using a borrowed ute for the last few days - and one of the nice things it had was a bull bar at the front with slots in it for a piece to go up to the roof level. So you could put something long up on three points - the back of the tray, the front of the tray, and the front of the car.

I want to be able to do the same with my stagea! Years ago I made something for the towbar that went up to the roof - which was good for things up to about 4m or so, as you attached long things to the towbar bit, then the back roof rack, then the front roof rack. But now I need to be able to do 6m stuff...

Has anyone put a bull bar on their stagea?? I found this post http://www.skylinesaustralia.com/forums/topic/225687-so-how-does-a-stagea-drift/page__p__3978775__hl__bull+bar__fromsearch__1#entry3978775 from 3 years ago, but no more details were provided.

Anyone? (and yes, I know you are all shuddering.. But my stagea isn't my have fun car, it's my carry the crap car.. :-) )

Ian

Link to comment
https://www.sau.com.au/forums/topic/362218-bull-bar-on-a-stagea/
Share on other sites
ian Experienced

ian

Posted
  • Author
Posted

I had a look through the front grill (duh...:-) ) at it's pretty obvious where you attach it as the stage was obviously made to take a bull bar as not only doe it have the mounting points but also the holes for the bolts! I hadn't realized this, as my skyline certainly doesn't...

Give that, I'm probably going to weld up my own thingy, I'll put some pictures up when I do.. Now all I have to work out is how to get the front bumper off so I can measure it all up properly, I'll start undoing all the obvious screws this weekend.. :-)

Ian

nickcorr Proficient

nickcorr

Posted
Posted

nah, that isn't how airbags work. There is nothing you could do at the front of your car that would impact the air bags..

Err... Sorry mate... It is how they work... That is why there is the big hoo haa with airbag bull bars for Patrols, LandCruisers and the like...

There has to be enough energy getting though to the crash sensors in order for them to know that the car is crashing and so deploy the airbags.. When airbags were first fitted to large, aftermarket bull bar equipped 4x4's there were some horrific incidents where people were killed or badly injured because the airbags did not deploy during a frontal crash..

ARB website info about air bags

Have a good think about it before you do anything too drastic.. :thumbsup:

ian Experienced

ian

Posted
  • Author
Posted

Err... Sorry mate... It is how they work... That is why there is the big hoo haa with airbag bull bars for Patrols, LandCruisers and the like...

There has to be enough energy getting though to the crash sensors in order for them to know that the car is crashing and so deploy the airbags.. When airbags were first fitted to large, aftermarket bull bar equipped 4x4's there were some horrific incidents where people were killed or badly injured because the airbags did not deploy during a frontal crash..

I stand corrected, even if it doesn't make much sense to me theoretically..:-) In my case it doesn't ,matter as what I'll have at the front won't make any difference to the crash profile anyway.

In addition, I think it is pretty clear that the stagea was designed to have one - the mounts are all there and even have the bolt holes pre drilled..

Thanks for the info

Ian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • MBS206
      Hi everyone.

      By MBS206 · Posted

      I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...