Jump to content
SAU Community

Damaged 180Sx! Ca18Det 5 Speed!

Dr Tuning
 Share

Recommended Posts

Dr Tuning Collaborator

Dr Tuning

Posted
Posted

Hey guys, am selling a 180 for wreck or re-register...

The car was involved in a front ender about 2 yrs ago, i bought it off a mate as i was going to use it as spares for my S13 at the time though this idea has fallin through & have now decided to sell it..! Its great for parts as all the glass, doors & rear are fine & the engine & box are perfect... The front end is not the best so you would have to either cut the drivers section out of the strut tower & replace it with a 'Half cut' as this would probably be the cheapest & best option though it comes with a new drivers Gaurd & Bonnet to help on that behalf... The Radiator support is pretty fudged as well so you would have to replace that too.. It wasn't a hard enough hit to damage the motor or any of its surrounds though the chassis is also damaged at the very front but not anywhere else...

The car drives fine & you can come & inspect it pretty much anytime that suits you as it still starts & runs, sounds awesome but if you do buy it complete you will have to get it towed... It was never classified as a write off as the smash was completely private so all it needs is a Blue Slip ( RWC ) to re-register... I would prefer to wreck it as most parts are still in good condition but it depends on the buyer i guess! Anyway, prices are listed bellow & am pretty firm on the motor & box!!

CA18DET & 5 SPEED, complete with Harness, ECU & S14 T28 - $1500 / Great complete package for a non turbo S13, can hear running as well.

Viscous LSD to suit, complete with drive shafts!! Great to go with the Engine & Box if used in a non turbo S13 - $200

Bar, Gaurd, Bonnet, Doors, Quarters, Windows & Interior - Ask for prices as i would like to sell the motor & box first or keep it complete for now incase anyone wants it to repair!!

Anything else, like the Pedal box & such just ask... Cheers!!

If you would like the whole car to perhaps use it as a track slider or to re-register it then the best i can do is $2200 as its worth much more it parts alone... Check out the pics & tell me what you think anyways, thanks guys its great if you have an Auto 180 & want a manual conversion!! Cheers again...

Matt

Link to comment
https://www.sau.com.au/forums/topic/362263-damaged-180sx-ca18det-5-speed/
Share on other sites
Dr Tuning Collaborator

Dr Tuning

Posted
  • Author
Posted

Oh, the car is located in Blacktown NSW 2148... And here are some pics lol.

180engine.th.jpg

Uploaded with ImageShack.us

180t28.th.jpg

Uploaded with ImageShack.us

180front.th.jpg

Uploaded with ImageShack.us

180side.th.jpg

Uploaded with ImageShack.us

180side2.th.jpg

Uploaded with ImageShack.us

The wheels in the last pic dont come with the car & arnt for sale either, cheers guys!!

Dr Tuning Collaborator

Dr Tuning

Posted
  • Author
Posted

Here are some more pics of the damage...

180front2.th.jpg

Uploaded with ImageShack.us

180corner.th.jpg

Uploaded with ImageShack.us

180corner2.th.jpg

Uploaded with ImageShack.us

The strut tower itself is actually fine on both sides, its just a bit fudged from that to the support on both sides & the guy i bought it off attempted to fix it though i would have just cut the section i needed from a Half Cut & welded it on with the support.!

I also noticed the hatch is in need of some repairs as well, it had a Spoiler on it at some stage of its life & looks like it was 'Bogged' over so that has started to crack around the Bog & the Paint job overall is pretty dam average with fading on the roof & pressure pack black on parts of the Quarters...

Matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • joshuaho96
      UniClutch

      By joshuaho96 · Posted

      All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Piggaz
      UniClutch

      By Piggaz · Posted

      Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...