Jump to content
SAU Community

Recommended Posts

hey guys i have these for sale as a set or individual sale...

no pics as we all know what cams look like...

they are used slightly for only aboiut 5000ks and the cam gears are the otomotto blue os giken versions...

cams are $500

cam gears are $200

if you want both make me an offer

mobile number is 0478045124

cheers,

chris

What are the cams for? R32/33 or R34?

Can you provide us with the ID marks on the end of the cam to confirm they are genuine Tomei as well as the lift figures?

they are for an r32 or r33 gtr not for r34... although you could probably use the inlet camshaft on an r34 rb26...

they are 262 duration with 9.25mm lift from memory.. i will post pictures tonight i am just at work at the moment..:action-smiley-069:

yeah sorry i should have actually read the information on the cams... they are 260duration and 9.15mm lift

pics up tonight as i got a bit too pissed last night and forgot

  • 3 weeks later...

okidoki, time for an update...

i sold the tomei cams a while back and still have the OS GIKEN cam gears,

i also have a pair of camshafts with the same profile as the tomei 260, with 9.15 lift.... i am unsure of the brand, but they are in verry good condition,

pics up tonight and the prices are as follows...

cams 500

cam gears 300

or both for 600...

also open to swaps and offers

  • 1 month later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...