Jump to content
SAU Community

Recommended Posts

My name is stuart and i have a issue with my r32gtr,

2 weeks ago the car just stoppeed and i believed either the cas or the ignition module was faulty,i borrowed both parts off a mates car and found it to be ignition moduel.

I bought a new unit and that has fixed that origional problem.I now have another

If i stand on the load pedal at 5000 rmp the car gets a flutter[like rev limit but softer]and the car still boosts fine,but if i squeeze the load pedal the car revs to 8000 rpm with out any flutter.

i have regaped plugs,cleaned and insulated coil packs[super sparks 2 years old,14,000km's]removed amm and resoldered,plus undone all elec plugs and cleaned with electronic spray.i have also looped out boost controller and checked rev limit on power fc.all sensor are working onthe car corectly.

Has any one else had similar problem and found the answer it would greatly appreciated.Thank you for your time

stuart 0409135950

Link to comment
https://www.sau.com.au/forums/topic/364486-r32-gtr/
Share on other sites

I take off and nail it and at 5000 to rev limit 8000 there it is the fluffy off tone hesitaion,but the car still pulls hard,damo of sau tassy thought it may be fuel pump so i clamped off fuel return line last night still has same issue.

I also lowered the rev limit on power fc then back to the 8000 as set made no difference,thought maybe a computer glintch.

I have also disconected battery for 1 day to reset power fc.

stuart

Link to comment
https://www.sau.com.au/forums/topic/364486-r32-gtr/#findComment-5816511
Share on other sites

If the coil packs and plugs dont fix,i am going to borrow a feul pump gauge and a nother power fc and amm,

all the parts i a borrowing are off a mate gtr that has same tune as mine.so i wont have to change any peramaters in fc

stuart

Link to comment
https://www.sau.com.au/forums/topic/364486-r32-gtr/#findComment-5817698
Share on other sites

Stu, you go into the sensor output screen on the pfc, this is a good way to test the afms. If they put out a different voltage (noticable diff) you have a problem. Are you running an aftermarket fpr?

Link to comment
https://www.sau.com.au/forums/topic/364486-r32-gtr/#findComment-5817871
Share on other sites

Hi rbnt

It looks like i have found the problem,one coil pack seems to be the issue,i have fitted my mate new units this morning and the issue has gone,so what i am going to do is keep putting min e back in one by one till i find faulty one.

A good call on the fuel pump i think i will buy a new unit as this one is 5+ years old.

A BIG THANKS TO EVERY ONE WHO HAVE GIVEN ME ASSISTANCE,AND I WILL HAVE TO UPGRADE PARTS.

STUART

Link to comment
https://www.sau.com.au/forums/topic/364486-r32-gtr/#findComment-5818369
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...