Jump to content
SAU Community

Recommended Posts

A mate of mine has a RB30 turbo the motor goes well doesnt blow smoke etc,but when the noise of the clutch fan stops you hear a noise when revving between 1500-2500 approx. a noise like a cross between big end rattle and noisy lifters,if you keep constant revs 2500 noise stays the same ,but on idle you cant hear anything ,motor sounds OK any ideas????

Link to comment
https://www.sau.com.au/forums/topic/36540-noise-in-motor/
Share on other sites

Does the noise stop when the car warms up, or will it do it all day? I have a similar sounding noise in my 33 but by the time I get anywhere to show anyone the car is warm and it doesn't do it anymore.

A mate of mine has a RB30 turbo the motor goes well doesnt blow smoke etc,but when the noise of the clutch fan stops you hear a noise when revving between 1500-2500 approx. a noise like a cross between big end rattle and noisy lifters,if you keep constant revs 2500 noise stays the same ,but on idle you cant hear anything ,motor sounds OK any ideas????
Link to comment
https://www.sau.com.au/forums/topic/36540-noise-in-motor/#findComment-731503
Share on other sites

mine does the same as you R3AP3R, its just the hydrolic lifters

Yeah, mine's a weird problem. The noise stops and starts depending on throttle position (and even that varies). I can be maintaining say 2000 rpm in 2nd and it will make this noise, if I back off the throttle completely it may stop, or if I slightly increase throttle it may stop. Then it may stop and start at various times again depending on how I'm driving. After a few minutes (and it seems to be lasting longer over time) it will stop completely. I'm assuming this is because something has warmed up sufficiently.

I would have thought lifters would have been a constant ticking who's frequency would vary with revs, but be continual until it got warm.

It doesn't seem to cause any performance problems, it just sounds like crap and is embarrasing.

Don't mean to take over this thread, but I think we may be having similar issues.

Link to comment
https://www.sau.com.au/forums/topic/36540-noise-in-motor/#findComment-731570
Share on other sites

yeah that sound something like mine

It doesn't seem to cause any performance problems, it just sounds like crap and is embarrasing.

they dont cause any performance problem for me etheir, the main reason i want to fix it is because it is embarrasing (most people dont notice though because they are rather quiet, only loud when i first start the engine when it cold)

Link to comment
https://www.sau.com.au/forums/topic/36540-noise-in-motor/#findComment-731605
Share on other sites

those of you with lifter noises, have you tried a different oil?

I have a Mitsubishi Galant VR4 so I KNOW about Lifter noise.

Mine has reduced heaps when I changed to Motul 4100 TurboLight oil.

Cost = $39.95 for 5L

I bought mine from Autojoy at Burwood Westfields.

It is fully synthetic, and seems to be heaps cheaper than other synthetics I'ev seen/used.

It might be worth a try for you guys too.

Link to comment
https://www.sau.com.au/forums/topic/36540-noise-in-motor/#findComment-734372
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...