Jump to content
SAU Community

Recommended Posts

Injectors

550cc Top feed

denzo injecotrs i had them cleaned ( cost me 125 )

had new orings put on aswell

will fit 11mm and 14mm ( plugs included )

330 Firm

Avo Intercooler ( good quality )

Bloack in color Return style.

couple of bent fins but not twisted or anything

i bought for 830 and made 306 rwkw with it

Comes with all piping needed

looking for 250 FIRM

SPACERS...........

4x114.3

20mm $80

30mm $75 does not come with nuts ( but i know where to get them )

5x114.3

25mm $75 does not come with nuts ( but i know where to get them )

im tracking down nuts for them now

Wrecking R33 Skyline PARTs

Rear Calipers $80 Firm

Steering Rack $40

Stock Turbo

minimal shaft play

no actuator $250 Firm

Rb25det done 120xxx

And has had

NO modifications

( not even pod filter ) $1680

Rb25det Auto gearbox

Drove fine $250

R33 Tail lights

(tiny chip where indicator is) $70 PAIR comes with center garish

White Rear bar ( STD )

ill throw reo bar in $70

R33 white s2 Wing+boot $50 FOR BOTH!!

R33 Front Fenders $65 for left

Left one has a small paint $75 for right

chip where headlight is $120 for both

drivers side door skine

( GOOD NICK s2) $40

boot carpet $20

Rear seats $50

Oem Clutch ( looks like there

is alot left ) $80

Turbo Smart Bov Adapter (alloy) $18

s1 Centre Grill $18

S14 S2 PARTS

Hand Brake Set up

Lever plus cables $90

Brake booster and master

cylinder $90

Right hand door excluding

switch has some paint fade $90

Drivers door switch $35

Sunroof i have

comes with

glass + motor + lineing

$40 Stupid low just want it gone

S2 boot + wing

paint has faded $45

Stock bov and pipe that

runs over engine $50

Auto Diff ( will fit man )

only done 130xxx minimel play $110

glove box ( good nick ) $30

Good nick Stock AFM $50

Ignition pack $40

Washer bottle ( no cracks ) $30

Mirrors Left And Right

tiny bit of paint fade

Black base red mirror $45 per side

S14 FULL rad support $60 CHEAP!!!!!!!

s13/180sx

Drivers Seat in ok condition(sr)$25

Stock Rear bar (black) $25

Stock ca front bar( Grey ) $25

Thats all i can think of right now

i have alot of photos so if you want to ask any questions or see anything just ask

[email protected]

0430106414

located in s.e suburbs Melb

willing to do swaps for r32 Gtr passenger / rear seats

Link to comment
https://www.sau.com.au/forums/topic/366325-after-market-stock-heaps-here/
Share on other sites

20mm 4 stud are gone but if your are talking about the 5 stud. the studs on your car wil poke a tiny bit

and yes i will courier if you organise it :)

if you still want pics throw me a sms

0430106414

can you send me pics of the AVO intercooler ? what was it fitted too ? curious on what brackets you have. either email or sms [email protected] or 0417506282

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...