Jump to content
SAU Community

Recommended Posts

Injectors

550cc Top feed

denzo injecotrs i had them cleaned ( cost me 125 )

had new orings put on aswell

will fit 11mm and 14mm ( plugs included )

330 Firm

Avo Intercooler ( good quality )

Bloack in color Return style.

couple of bent fins but not twisted or anything

i bought for 830 and made 306 rwkw with it

Comes with all piping needed

looking for 250 FIRM

SPACERS...........

4x114.3

20mm $80

30mm $75 does not come with nuts ( but i know where to get them )

5x114.3

25mm $75 does not come with nuts ( but i know where to get them )

im tracking down nuts for them now

Wrecking R33 Skyline PARTs

Rear Calipers $80 Firm

Steering Rack $40

Stock Turbo

minimal shaft play

no actuator $250 Firm

Rb25det done 120xxx

And has had

NO modifications

( not even pod filter ) $1680

Rb25det Auto gearbox

Drove fine $250

R33 Tail lights

(tiny chip where indicator is) $70 PAIR comes with center garish

White Rear bar ( STD )

ill throw reo bar in $70

R33 white s2 Wing+boot $50 FOR BOTH!!

R33 Front Fenders $65 for left

Left one has a small paint $75 for right

chip where headlight is $120 for both

drivers side door skine

( GOOD NICK s2) $40

boot carpet $20

Rear seats $50

Oem Clutch ( looks like there

is alot left ) $80

Turbo Smart Bov Adapter (alloy) $18

s1 Centre Grill $18

S14 S2 PARTS

Hand Brake Set up

Lever plus cables $90

Brake booster and master

cylinder $90

Right hand door excluding

switch has some paint fade $90

Drivers door switch $35

Sunroof i have

comes with

glass + motor + lineing

$40 Stupid low just want it gone

S2 boot + wing

paint has faded $45

Stock bov and pipe that

runs over engine $50

Auto Diff ( will fit man )

only done 130xxx minimel play $110

glove box ( good nick ) $30

Good nick Stock AFM $50

Ignition pack $40

Washer bottle ( no cracks ) $30

Mirrors Left And Right

tiny bit of paint fade

Black base red mirror $45 per side

S14 FULL rad support $60 CHEAP!!!!!!!

s13/180sx

Drivers Seat in ok condition(sr)$25

Stock Rear bar (black) $25

Stock ca front bar( Grey ) $25

Thats all i can think of right now

i have alot of photos so if you want to ask any questions or see anything just ask

[email protected]

0430106414

located in s.e suburbs Melb

willing to do swaps for r32 Gtr passenger / rear seats

Link to comment
https://www.sau.com.au/forums/topic/366325-after-market-stock-heaps-here/
Share on other sites

20mm 4 stud are gone but if your are talking about the 5 stud. the studs on your car wil poke a tiny bit

and yes i will courier if you organise it :)

if you still want pics throw me a sms

0430106414

can you send me pics of the AVO intercooler ? what was it fitted too ? curious on what brackets you have. either email or sms [email protected] or 0417506282

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...