Jump to content
SAU Community

Recommended Posts

hyper gear tr43i turbo externally gated t3 flange and v band rear housing held 370rwhp on my r33 easy- $450

1x r33 intake manifold bare just top and bottom -$50

1x r33 intake manifold complete with injectors rail and sensors-$100

2x r33 throttle bodies one with tps other non and one s1 and one s2-$40 each

1xr33 pink label afm-$60

2x 12"(i think) thermo fans- $20

1x r33 exhaust manifold-$50

1r33 man ecu -$60

1x r33 standard air box-$30

location Brisbane

contact on here or 0412383721

Link to comment
https://www.sau.com.au/forums/topic/367418-cheap-r33-parts/
Share on other sites

whats needed to bolt that turbo onto my r33 s1.5?

depending on whether you are going hi mount or low mount u will need and external gate and pipe from somewhere to plumb it, oil line and the exhaust shop to make it fit your dump pipe.

How good a working order is the afm? Pink label... That a S2 RB25DET? Will u post to Sydney?

dont realy have time to get down to the post ofice but i will let you know but yes should be working as it was on my car before i went map sensor.

Link to comment
https://www.sau.com.au/forums/topic/367418-cheap-r33-parts/#findComment-5863448
Share on other sites

  • 1 month later...
  • 3 weeks later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...