Jump to content
SAU Community

Recommended Posts

Found this info with a quick goggle search

Revlimit Motorsport (RMS)

Unit 3/ 38 Cohn St Carlisle 6101 (08) 9470 2444

- Link

- Autronic

- UTEC

- Motec

Maximum Motorsports (MMS)

66 Westchester Rd Malaga 6090 (08) 9249 7444

- Link

- Autronic

- Motec

- Unichip

- ECUTEK

Speedworks

4 Carbon Ct Osborne Park , WA 6017 (08) 9242-8888

(own 4WD hub dyno)

- Link

- Autronic

- Motec

- Power FC

- UTEC

- emanage

Race Torque

16 Action Pl Wangara 6065 (08) 9302 6388

- Link

- Autronic

- Motec

- ECUTEK

XSPEED

18 Zeta Crescent, O'Connor 6154

Parts : 08 9331 8088

Garage & Dyno : 08 9337 3288

- Link

- Autronic

- Motec

- Power FC

- emanage

Hyperdrive Motorsport

Unit 1/ 28 Vale St Malaga 6090 (08) 9209 3100

- Autronic

- Power FC

West Racing

Unit 5/ 6 O'Malley St Osborne Park 6017 (08) 9446 1913

- Motec

- Unichip

- Autronic

Tony Flood

9/ 91 -93 Kew St Welshpool 6106 (08) 9472 1800

- Motec

- Link

Intune Performance

1/15 Murphy st O Connor 6163 WA

0414 874 824

- Motec

- Xcede

- Autronic

- Link

- Haltech

- Motec

- Power FC

All Star Garage

Unit 3, 21 Vale Rd Malaga (08) 9248 7433

- Link

- Autronic

- Motec

- Power FC

- Verso

Link to comment
https://www.sau.com.au/forums/topic/367537-r32-gts4-tune/#findComment-5862462
Share on other sites

thanks everyone. sorry about posting in the wrong thread

i have a stock auto ecu running atm and a stock manual ecu spare. i was gonna swap them over but was told there will be no difference..

i will be installing a new clutch and light weight flywheel then a fmic then i will be looking at getting it tuned and the boost jacked up to 12psi.then shim the rear diff and some 75w-140

to get the box out will i have to drop both tailshafts?

what style clutch do you reccomend? cusion button or pucked

thanks for all the feedback

Link to comment
https://www.sau.com.au/forums/topic/367537-r32-gts4-tune/#findComment-5864100
Share on other sites

yeah i know all too well about marking tailshafts. my marks rubbed off at work one day and after looking at it for a while igot it back to where i thort it was originally, road tested and no vibrations , lucky.. now ive got a nice white pait marker.

how much for a chipt ecu, or aftermaket ecus?

car seems to hunt at idle sometimes, im thinking lazy o2 or vacuum leak

gonna go with the cusion button cos peak hour traffic is a bitch and planning on doing trak days but not to often.

what would happen if i ran those mods on the stock ecu with no tune?

Link to comment
https://www.sau.com.au/forums/topic/367537-r32-gts4-tune/#findComment-5865746
Share on other sites

how much for a chipt ecu, or aftermaket ecus?

car seems to hunt at idle sometimes, im thinking lazy o2 or vacuum leak

what would happen if i ran those mods on the stock ecu with no tune?

RRP for a Type 2 NIStune board is about $260 delivered.

Hunting is probably a dirty airflow meter.

RB20 ECU's are pretty tolerant, with stock turbo mine handled 14psi without throwing a fit. It will just run rich and not make as much power as it could be making.

Link to comment
https://www.sau.com.au/forums/topic/367537-r32-gts4-tune/#findComment-5865815
Share on other sites

Anything that doesn't leave a residue behind will work on the afm.

The Type-2 NIStune board suits R32GTSt/GTR (among others) and is a daughterboard that is plugged into the stock board (that is putting it simply). It gives you full tunability in realtime over the consult port :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/367537-r32-gts4-tune/#findComment-5866290
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...