Jump to content
SAU Community

Recommended Posts

I have a few things that I no longer need and need to get rid off... All items are located in Melbourne Western suburbs and can be picked up if needed. Interstate buyers, I will post items out. Its no issue. If anyone has any questions on any of the below items I have for sale, feel free to PM me. I am open to reasonable offers. I can also be contacted directly on 0421 205 751. Just leave me a text message & I will get back to you.

Thank you

Item #1: HKS Super Power Flow Intake - $150ono

I have a Used Super Power Flow intake with all brackets, clamps, blots & adaptors to suit EVO's 4-9. Not sure if they will Fit 1-3? Do they have the same AFM?

I have also purchased a BRAND NEW 3 layer filter element with I will be providing along with it.

hkssuperpowerflow1.jpg

hkspod.jpg

Item #2 Apexi Power Intake Kit - $150ono

I have a Used Apexi power intake kit. Comes with Heat sheild, brackets, gaskets bolts etc. Suits EVO 4-9. Not sure if it will fit Evo 1-3. Do they have same size AFM? The Pod is universal and will fit directly to any Nissan AFM's. The Pod has a small rash on it. Does not effect its performance at all.

apexipowerintake1.jpg

apexipod.jpg

Item #3: Beat Rush Air box for CN9A/CP9A EVO 4-6. - $200

This is a used air box which covers the Pod.

airbox1.jpg

airbox3.jpg

Item #4: Greddy sandwitch Plate for CP9A EVO 5/6. - $100

Used Greddy sandwitch plate for oil pressure/temp sensors.

greddyplatecp9a.jpg

Item #5 Carbon Canards for EVO 5, May possibly fit Evo 6 - $120ono

Picks up heaps of ckicks with this. Also improves down force...

carboncanards.jpg

canards.jpg

Item #6: Greddy Profec B electronic boost controller - $250ono

This unit has a 2 stage boost setting and the ability to adjust the gain level as well.

profecb.jpg

Item #7: Greddy Electric Boost gauge. Peak/warning type. - $160ono

Greddy Boost gauge. Made by the same company as DEFi. Also have genuine Trust Stand which I will supply for free.

boostgauge.jpg

Item #8: Greddy Profec B spec II electric Boost controller. - $350ono

Greddy electric Boost controller with a NEW Trust/Greddy Solenoide. Digital display & other functions.

profecbspecii.jpg

BOOST CONTROLLER & APEXI POD STILL FOR SALE....all others items SOLD

Greddy Profec B spec II electric Boost controller. - $350ono

Greddy Profec B electronic boost controller - $250ono

Apexi Power Intake Kit - $150ono

Will not refuse any reasonable offer!

Greddy Profec B spec II electric Boost controller. - $350ono

Greddy Profec B electronic boost controller - $250ono

Apexi Power Intake Kit - $150ono

Who wants them???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...