Jump to content
SAU Community

Recommended Posts

hey mate are you still selling O2 sensors for the R33 Gtst? If so how much with postage to Toowoomba 4350? cheers

Just found you on Ebay. Cheers man

Edited by A Grave Digger

hey mate are you still selling O2 sensors for the R33 Gtst? If so how much with postage to Toowoomba 4350? cheers

Just found you on Ebay. Cheers man

Hey buddy,

Surely am - you can purchase one here (via PayPal) with delivery included for just $69!

I can forward you bank details if you prefer that.

- Brendan

  • Like 1
  • 5 weeks later...

Hey there,

I have a series 2 1996 R33 gts25t, after a new O2 sensor, from what I understand it is a pretty straight forward installation ie. unscrew and then screw in?

Cheers,

Dan

Hi Dan,

Yes - it's just a matter of unscrewing the old and screwing in the new then plugging it back in.

Very easy indeed!

- Brendan

  • 1 month later...

Hey,

Do you have any o2 sensor in stock for the Stagea C34 series 2? It's the Rb25det NEO.

Thanks

Edited by Down_Shift

Hey,

Do you have any o2 sensor in stock for the Stagea C34 series 2? It's the Rb25det NEO.

Thanks

Hi,

You would need to use a universal 3-wire sensor for the R34 as it uses a different O2 sensor.

Cheers,

Brendan

(VM)

Hey champ do these work on R33 GTR? what you mean only on cyl 4-6??

Hi,

Yeah from what I am aware of the GTR has 2x O2 sensors fitted; this one sits on 4-6 cyl. side.

Cheers,

Brendan

(VM)

Hi,

Yeah from what I am aware of the GTR has 2x O2 sensors fitted; this one sits on 4-6 cyl. side.

Cheers,

Brendan

(VM)

Umm ok so do you cater for cyl 1-3??

This is to replace the sensor inside engine bay near dump pipe right for R233 GTST? what about the one plugged into the cat on the exhaust ?

Hi,

Correct that is the O2 sensor on the R33, the other sensor is actually a CO2 sensor with the metal wires.

- Brendan

FYI, these NTK OZA395-E2 sensors will work with an R34 GTR (fairly sure R33 too). I have them in my 34 GTR and they run perfectly (well one died a little quickly), however the wires are slightly short to fit all the guides, but you can easily organise them neatly.

This is a great price and i will be ordering one to replace my faulty item as soon i can be bothered to rip it out.

FYI, these NTK OZA395-E2 sensors will work with an R34 GTR (fairly sure R33 too). I have them in my 34 GTR and they run perfectly (well one died a little quickly), however the wires are slightly short to fit all the guides, but you can easily organise them neatly.

This is a great price and i will be ordering one to replace my faulty item as soon i can be bothered to rip it out.

Thanks for that information re GTR's.

- Brendan

  • 4 weeks later...
  • 1 month later...



  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...