Jump to content
SAU Community

Recommended Posts

Up for grabs i have a couple of items

CP forged pistons, 8.3:1 compression suit rb30 with rb25/26 head

86.5mm

pistons have been used for approx 1000kms and the decision was made to change to 9:1 compression

come with pin locks

pistons are in great condition

will post up pics if there is interest

$400

Pro engines 4wd adapter kit.

This allows the rb30 to bolt into the gtr with the use of the alloy sump and diff

comes with all nuts and bolts, template, oil pickup, conversion plate

this kit uses the oil pickup which fits inside the sump, i believe its the only kit that does this, other kits need an external pickup made after the kit has been purchased.

pickup is a nice piece of work, tig welded stainless

We assembled this onto a rb30 block but has not been used

$990 to purchase new

selll for $600

pm or post here

may post up some more parts soon

Edited by blue_vl_t

Yea sorry, wa. , but can post no worries, you get use to posting parts when living on the west. About $65 to post to east for plate conversion and pistons together just priced it, but will depend where you are. Send me a pm if you want, there is already a bit of interest but no $$ yet

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...