SRB Posted July 7, 2011 Share Posted July 7, 2011 ive decided to sell my GTR and everything that goes with it after being so close to completion im just over it and have other priorities right now. OS GIKEN RB30 SHORT BLOCK $17k BRAND NEW NEVER USED full motec m800 setup with motec SLD dash, SLN, CDI ignition, everything imaginable 17k (cost 25) full race spec jun head NEW NEVER USED, 11k (cost 13) hypertune intake w/90mm plenum and billet fuel rail with water breather setup NEAR NEW 4k greddy radiator NEAR NEW 500 greddy 150mm intercooler NEAR NEW 1500 1200hp triple pump surge fuel setup and all lines USED FOR 1 START UP 5k trust single hi mount manifold and wastegate AS NEW used for under 1000km 2k 19x10 racing hart rs721 with hankook 265/30/19s 95% tread 3k everything is sitting at a workshop in sydney and can be inspected upon prior arrangement with myself and i will arrange it with the shop (apart from the car and m also selling the r32 gtr as a rolling shell for anyone who may be interested $12k ready to drop an engine and loom into - custom dark green, has all glass/panels/lights intact and good condition and complied - tein super streets -kts hicas lock and front upper arms and traction rods - cusco castor rods and rear camber arms - all brand new whiteline bushes and swaybars were fitted - r33 gtr brembos with new DBA rotors and FERODO DS2500 pads these were all fitted a few years ago, but the car has been off the road and when it was on the road, i had only done a few thousand km MAX highway and some street driving. ill start gathering the pics tonight and over the weekend but if your keen most of it speaks for itself msg me and well go from there. everything is located in sydney thanks!! Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/ Share on other sites More sharing options...
SRB Posted July 7, 2011 Author Share Posted July 7, 2011 pms replied, had a few pms about the head for specs, its a stage 2R head 280deg cams high lift double springs, retainers, nitto guides and valves and everything is brand new, the head was brought brand new from nissan and its assembled ready to go!! thanks Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5902781 Share on other sites More sharing options...
SRB Posted July 7, 2011 Author Share Posted July 7, 2011 (edited) pic of car and wheels pic of engine bay where the intake side can be seen and the radiator, fuel setup in boot, there is also a fuel filter and the lines that run under the car all the way to the front to be included. ll be going to the workshop tomoro to take pics of the head and as much as i possibly can!! Edited July 7, 2011 by SRB Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5902829 Share on other sites More sharing options...
-Totenkopf- Posted July 7, 2011 Share Posted July 7, 2011 pic of car and wheels pic of engine bay where the intake side can be seen and the radiator, fuel setup in boot, there is also a fuel filter and the lines that run under the car all the way to the front to be included. ll be going to the workshop tomoro to take pics of the head and as much as i possibly can!! I know how you feel big fella. I am almost at the same point as you, seems all I am doing is emptying my pockets and going nowhere. PM sent anyway! Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5902996 Share on other sites More sharing options...
SRB Posted July 8, 2011 Author Share Posted July 8, 2011 (edited) some pics of the head, - the cams and springs have not been installed yet, although they will be for the prospective owner. jun stage 2r hi lift cam kit nitto guides and valves race porting and all new stems, collets etc etc the MOTEC stuff consists of - M800 ECU WITH ADVANCED FUNCTIONS - SDL BACKLIT DASH AND CONNECTOR - SDL 8MB LOGGING - SKM KNOCK SENSOR - SKM KNOCK SENSOR LOOM - SINGLE WIDEBAND LAMBDA UPGRADE - SLM SHIFT LIGHT MODULE - CDI 8 IGNITION SETUP - FULL CUSTOM HARNESS AND RE WIRE TO SUIT R32 GTR Edited July 8, 2011 by SRB Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5903681 Share on other sites More sharing options...
SRB Posted July 11, 2011 Author Share Posted July 11, 2011 all pms replied, these need to go Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5908743 Share on other sites More sharing options...
SRB Posted July 13, 2011 Author Share Posted July 13, 2011 motec sdl and logging SOLD all the other stuff still remains.. alot of interest in the head, block and intake and intercooler but nothing 100% yet... throw me an offer u never know Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5912274 Share on other sites More sharing options...
SRB Posted July 13, 2011 Author Share Posted July 13, 2011 now seperating motec if need be m800 ecu and loom w/ wideband lambda and advanced functions - $10k (wiring alone cost $8500 full mil-spec) knock sensor and loom $1500 cdi 8 ignition $1700 these have literally been used for one dyno run or 12k everything. Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5912665 Share on other sites More sharing options...
spenda Posted July 13, 2011 Share Posted July 13, 2011 would you seperate the coolant breather tank? im assuming its hypertune as well? Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5912831 Share on other sites More sharing options...
Chopstik Posted July 14, 2011 Share Posted July 14, 2011 intercooler n radiator is to fit which car? Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5913128 Share on other sites More sharing options...
SRB Posted July 14, 2011 Author Share Posted July 14, 2011 would you seperate the coolant breather tank? im assuming its hypertune as well? hey no sorry its going with the plenum, and yes its from hypertune intercooler n radiator is to fit which car? r32 GTR Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5913297 Share on other sites More sharing options...
SRB Posted July 14, 2011 Author Share Posted July 14, 2011 (edited) hypertune intake w/breather setup. intercooler with pining SOLD pending $. ive decided to keep my motec loom for a rainy day. the racing radiator is all alloy, 2 core, wide tube and 48mm thick motec m800 with advanced functions - $3500 motec skm knock sensor and loom $1600 motec cdi 8 ignition $1800 Edited July 14, 2011 by SRB Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5913665 Share on other sites More sharing options...
boostin31 Posted July 15, 2011 Share Posted July 15, 2011 Got pics of the motec stuff expecially the loom? Just wanna see how it was made up etc! Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5914869 Share on other sites More sharing options...
boz_soljah Posted July 15, 2011 Share Posted July 15, 2011 got gtr cank and rods Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5915702 Share on other sites More sharing options...
SRB Posted July 15, 2011 Author Share Posted July 15, 2011 Got pics of the motec stuff expecially the loom? Just wanna see how it was made up etc! its coming out next week ill get some then got gtr cank and rods sure do 17k read the first post Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5915881 Share on other sites More sharing options...
-Totenkopf- Posted July 15, 2011 Share Posted July 15, 2011 Sent you a PM. Let me know, got cash waiting Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5915986 Share on other sites More sharing options...
SRB Posted July 15, 2011 Author Share Posted July 15, 2011 all pms replied! Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5916061 Share on other sites More sharing options...
xxx200 Posted July 16, 2011 Share Posted July 16, 2011 ill take the radiator Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5916786 Share on other sites More sharing options...
caaraa Posted July 16, 2011 Share Posted July 16, 2011 Looks nice. Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5916837 Share on other sites More sharing options...
SRB Posted July 20, 2011 Author Share Posted July 20, 2011 (edited) MOTEC M800 AND SKM SOLD INTAKE AND INTERCOOLER SOLD WHEELS SOLD MANIFOLD AND GATE SOLD HEAD MAYBE SOLD.... WILL KNOW THURSDAY OS GIKEN RB30 SHORT BLOCK BRAND NEW NEVER USED PRICE DROP 16K 1200hp triple pump surge fuel setup and all lines USED FOR 1 START UP 4k PRICE DROP MOTEC ENGINE HARNESS AND CDI-8 8K Edited July 20, 2011 by SRB Link to comment https://www.sau.com.au/forums/topic/370251-gtr-race-engine-parts-best-of-the-best/#findComment-5923511 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now