Jump to content
SAU Community

Recommended Posts

Hey Guys,

I have a Nismo Gmax push type twin plate clutch for sale.

It has been fully rebuilt by NPC to handle 500rwkw.

All new fingers, springs and plates where fitted all surfaces machined.

The plates are now 6 puck solid centered items.

Suits RB20, 25, 26.

I ran it in for 1000+kms then raced at winton and blew my engine, now my car is going in a different direction

so i dont need this clutch anymore.

This is an awesome clutch, not too heavy but bites hard, real hard.

$1250

Located in Melb ( easterns )

Cheers

Campbell

0421840982

post-53833-0-22150600-1310021584_thumb.jpg

post-53833-0-52674000-1310021631_thumb.jpg

post-53833-0-84544600-1310021668_thumb.jpg

post-53833-0-31011700-1310021703_thumb.jpg

post-53833-0-64144500-1310021783_thumb.jpg

post-53833-0-93592500-1310021813_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/370258-nismo-gmax-twin-plate-vic/
Share on other sites

I've never driven a super copper mix but i drove this one to

work and back ect for a month and its was fine, even in traffic.

Because its still the same concept as a nismo just beefed up

it still drives nice.

Hope this helps

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...