Jump to content
SAU Community

Recommended Posts

A while ago, I saw an orbital polisher on special for $30 at Autobarn, so I thought meh, might get it and see how good it is.

After being in the box for a few months, I put it to use tonight.

I pulled my front bar off today for a touch up, so I thought I might as well take out my headlights for a clean.

Sanded it with 1200 & 2000 grit then finished off with a hand polish. After hand polishing it, it was still a tad murky. So I gave the polisher a go, and after a few mins.. The headlights look brand spanking new again! :D

But I have a question, what do I do with the buffer pad? Do I just wash it and dry it?

Here's some pics:

(Top headlight is hand polished and bottom is machine polished)

img1293r.jpg

img1294xc.jpg

img1295r.jpg

Link to comment
https://www.sau.com.au/forums/topic/370677-30-orbital-polisher/
Share on other sites

when i worked in mitsubishi in pait rectification they were just put through a washing machine, at home i just wash in the laundry tub with water.

Cheers, will clean it tonight :)

Also, any tips on polishing my car with that thing? lol

First we used a rotary buff to polish with, then the orbital with an egg crate type pad to get rid of marring (the swirly bit you see after polishing) sort of like what you see here http://www.ebay.com.au/itm/6x6-High-Gross-PolishingPad-Buffer-Pad-Car-Polisher-/180681082040?pt=AU_Power_Tools&hash=item2a116e84b8 but its for velcro backed polishers. Just make sure the polish doesnt get too dry and keep the pad clean.

First we used a rotary buff to polish with, then the orbital with an egg crate type pad to get rid of marring (the swirly bit you see after polishing) sort of like what you see here http://www.ebay.com....=item2a116e84b8 but its for velcro backed polishers. Just make sure the polish doesnt get too dry and keep the pad clean.

I bought black waffle pads from that seller; they're great! Bit slow on delivery tho'

This is what I did with them yesterday:

Reflection? post-61153-0-26778900-1310425114_thumb.jpg Try not to look at the ugly bloke; post-61153-0-56895300-1310425163_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If there's enough meat in the housing where you want to put the M12 adapter, then do it, but be aware that if/when you f**k that up you'll probably be repairing it before doing anything else. I'd just drill it out and tap ina 1/4" thread. No need for rocket surgery when the next most obvious thing will do. You could throw a 1/4 x 1/8 bush in there and use the same fitting you intended to use.
    • Is the only issue that the oil catch can is getting filled on hard runs? I'd be thinking more about oil control issues rather then the head lifting, especially as you aren't seeing spiking in the coolant pressure.  Do you need restrictors in the head, or better drains from the head? Does the sump need venting to the catch can?
    • Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Looks great, I hope everything is working well after all that time!
×
×
  • Create New...