Jump to content
SAU Community

Recommended Posts

Hey Jez id also like to know about whats illegal/what isnt... in regards to the spoiler, it looks pretty phat :P haha, but is it worth it. i guess its unique compared to the normal GTR wing. Ill do some research :P:rolleyes:

as stated above our laws here are vague and open to interpretation and how the coppers are feeling on the day they pull you up, suggest you paint the whole of the wing the same colour as the car (make sure the brake light works) as different colour panels/parts stick out like dogs gonads

I say don't put it on, our cars look heaps better without spoilers, and its not gonna get you any performance gain, if you want it to look tough, get some sort of bonnet scoop/vents, thats what i'm thinkin bout doin.

becarefull about cutting the bonnet for vents etc as it it can weaken the bonnet and if you cut through the bracing on the underside it can lead to a defect notice

Ok...so that leads me to another question....been thinking on the lines of getting a bonnet scoop...something that can be "stuck" on....not interested in it actually having a hole in the bonnet. Iv heard it is legal but needs to have mesh on it??? yes no maybe??

And yeah the wing is BLOODY heavy...so thinkin of keepin the stock one atm....(the search continues....)

Hey actually come to think of it...il put a pic up of the car now :)

med_gallery_75994_4242_68339.jpg

med_gallery_75994_4242_798292.jpg

Edited by jez NF

You want a bonnet scoop without cutting a hole in the bonnet??

For starters, that's just gay R.I.C.E. shit that will draw unwanted attention for no reason.

Secondly, if you don't have a hole in your bonnet, why would you need to mesh the scoop??

stick on bonnet scoop lol, while ur at it buy an old scuba tank bottle paint the word NOS and cable tie it to ur roof. but if you do go ahead with the scoop it wont be illegal coz it doesnt do anything.

the general rule with scoops etc is that they cant be rear facing ie a wrx with forward facing scoop is fine, evo scoops that face toward the windscreen arent. we had alot of issues with the clowns down at the pits coz they didnt wanna rego brand new evos with factory rear facing scoops

Jez NF thats a sick looking 33 don't change the spoiler, that looks phat, as for the bonnet scoop i didn't say i was gonna be cutting holes in it myself, was talking bout getting an aftermarket pre-done bonnet, theres plenty of shops around aus willing to ship to ya as you would know, but to be worrying bout heat from the cops cause of an add on to bodywork wouldn't worry bout it as long as you don't drive like a nut.

stick on bonnet scoop lol, while ur at it buy an old scuba tank bottle paint the word NOS and cable tie it to ur roof. but if you do go ahead with the scoop it wont be illegal coz it doesnt do anything.

hahaha.....I laughed when I read that :yes:

Jez NF thats a sick looking 33 don't change the spoiler, that looks phat, as for the bonnet scoop i didn't say i was gonna be cutting holes in it myself, was talking bout getting an aftermarket pre-done bonnet, theres plenty of shops around aus willing to ship to ya as you would know, but to be worrying bout heat from the cops cause of an add on to bodywork wouldn't worry bout it as long as you don't drive like a nut.

Thanks :thumbsup:

And yeah.....even if i do get bodywork done its gonna be done "professionally" and so that it looks perfect...i love my car and everything iv done to it has been done the right way.

By scoop I mean a subtle one...just to make it a tad more agressive without losing the classy look...this car is not meant to look like a track car / a mean agressive loud obnoxious beast....my next drift car will fill that gap hopefully...this is my daily and has to look classy enuff for my lady while still pushin out the performance and look to please me...

Anyway...to get back on topic...thanks to PIG_31 for that link.......really clears up a lot of stuff.....good read :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...