Jump to content
SAU Community

Recommended Posts

Ok so I'm pretty sure I know the answer to this

I went and test drove a cheap r34 at a dealership today $15900 was the price but I though what the hey it might need a small amount of work but for the price I'd check it out

The car started up fine no smoke

Was idling at 2000rpm till it warmed up then settled down to 950rpm

Oil pressure and temperature were normal

BUT the check engine light did not turn off it stated on the entire test drive the car also didn't feel very like I expected I've owned and r33 before and the r33 felt like it had way more power

The dealer obviously tried to hide this by saying that when the car was picked up the driver filled the car with 91octane and that was the reason for the check engine light and lack of power

Could this be the case or is it more likely the engine is f**ked?

Link to comment
https://www.sau.com.au/forums/topic/372624-91-octane-in-an-r34-gt-t/
Share on other sites

Yeah but had an s13 with a hole in the fuel tank I got it fixed and the stupid mechanic filled it up with 91 octane the car shook and spluttered an no check engine light

This car idled very very steady but just had no power and the check engine light worried me doesn't the light refer to an actually problem with the engine not the fuel supply?

if the knock sensors are registering a high amount of knock then it may come on. easiest thing to do would be to check the fault codes, or have them fill it with premium fuel and reset the ecu and see what that does. generally the CEL refers to an electrical issue (or damaged sensor). won't refer to the physical condition of the engine in 99% of cases

i got some better advice, find another car there is to many of these car on the market to even think of buying one with problems is just crazy remember it's a buyers market.

goodluck with your car hunting.

i got some better advice, find another car there is to many of these car on the market to even think of buying one with problems is just crazy remember it's a buyers market.

goodluck with your car hunting.

Yeah I ended up settling for a nice s2 r33 for $9500

It's stock as even has the airbox and SMIC so I'll save the excitement of owning an r34 for another 2-3years

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around without a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
    • Yep, this bit another local owner. I caught it before putting the transmission back into the car, what I noticed was the pressure plate fingers weren't flat and even. It's more obvious with the pull style clutch because the throwout bearing ring was visibly not flat once everything is put together. Nismo should really update their instructions to call out this specific detail. I'm not even sure the clutch as-shipped orients everything properly.
×
×
  • Create New...