Jump to content
SAU Community

R34 Sedan Sideskirts

jrm
 Share

Recommended Posts

jrm Veteran

jrm

Posted
Posted

I have a set of R34 sedan sideskirts in Sydney.

I'm not in Sydney, however I bought these over the internet on eBay and had a friend of mine in Sydney pick them up. In-between getting organising shipping, I managed to pick up another set locally. So - these are now useless to me.

Based on the pictures I've seen, they seem to be in reasonable condition. The seller didn't indicate whether they were real or fibreglass, so I don't know. They're silver in color (I believe KV2), but they will likely need a respray.

I'm looking for around $150 - what I paid for them - but I'm open to offers.

XoG5h.jpg

Link to comment
https://www.sau.com.au/forums/topic/373325-r34-sedan-sideskirts/
Share on other sites
erins Collaborator

erins

Posted
Posted

I have a set of R34 sedan sideskirts in Sydney.

I'm not in Sydney, however I bought these over the internet on eBay and had a friend of mine in Sydney pick them up. In-between getting organising shipping, I managed to pick up another set locally. So - these are now useless to me.

Based on the pictures I've seen, they seem to be in reasonable condition. The seller didn't indicate whether they were real or fibreglass, so I don't know. They're silver in color (I believe KV2), but they will likely need a respray.

I'm looking for around $150 - what I paid for them - but I'm open to offers.

XoG5h.jpg

able to ship to qld?

jrm Veteran

jrm

Posted
  • Author
Posted

I guess I can ask my friend in Sydney whether he's able to bubble-wrap them up and get an idea on postage, but I don't imagine it would be cheap.

Easiest would definitely be a buyer in Sydney able to pick it up, I think. I can't easily organise anything from SA.

  • 4 weeks later...
jrm Veteran

jrm

Posted
  • Author
Posted

He thinks they're probably fibreglass, but he can't be sure. The dramas of the skirts being in Sydney!

You're welcome to have a look or email / phone him - his email is [email protected] & mobile contact is 0415123004

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Wheel Sizes & Offsets For Skylines

      By The Bogan · Posted

      The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • GTSBoy
      R34 Handbrake light saying ON and intermittently flashing

      By GTSBoy · Posted

      Does the scanner do all the CUs in the car, or only the ECU?
    • albyz34gt
      R34 N/a And R34 Turbo (gtt) Transmission.. Uh, Problem.

      By albyz34gt · Posted

      @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • RB25inside
      R34 Handbrake light saying ON and intermittently flashing

      By RB25inside · Posted

      Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...