Jump to content
SAU Community

Recommended Posts

hey everyone, just wanna find out if anyone has fitted say 19x10 all around on a v35 coupe. also any one got some recommendations of some rims that come in say 19x9.5 +20 (or lower) front and 19x10 (+20 or lower) back. or same thing in 20's that will clear the factory brembos. been looking at vossens they seem to but are pretty pricey. i was looking to spend between 2.5k to 3.5k with tires. thanks

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

I saw someone on here or on G35driver with 10" rims all round, not sure if they had Brembo tho. Have you searched the V series Gallery?

http://www.skylinesaustralia.com/forums/topic/233300-v-series-gallery/page__st__600 ..................post 618

http://www.skylinesaustralia.com/forums/topic/233300-v-series-gallery/page__st__480...................post 487

http://www.skylinesaustralia.com/forums/topic/233300-v-series-gallery/page__st__480...................post 498

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5959739
Share on other sites

hey everyone, just wanna find out if anyone has fitted say 19x10 all around on a v35 coupe. also any one got some recommendations of some rims that come in say 19x9.5 +20 (or lower) front and 19x10 (+20 or lower) back. or same thing in 20's that will clear the factory brembos. been looking at vossens they seem to but are pretty pricey. i was looking to spend between 2.5k to 3.5k with tires. thanks

I got Axis Hiros 8.5 front with 245/40/19

and back 9.5 with 285/35/19

I wish when i got wheels i knew a thing or two about them but now i would get these

FIVE AD WHEELS

19 x9.5+35 / 19 x10.5+22.......$1700 shipped

.****Free lugnut kit, valve stems, Hub rings

from Kevin@US-Autotech

As for wheels after all the research i was gonna get Michellen Super Sport tyres for $1300 shipped from tirerack but i ended up getting Hankook K12 Evos (95% as good) and got them for like $1000 shipped (same sizes as Kumo KU31s i have already)

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5959772
Share on other sites

check out http://varrstoen.com/blog/

Range of styles, sizes and offsets. They have an sell on Ebay and are set up with a tyre package for like $2700ish.

I'm waiting on my set to arrive, hopefully any day now.

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5960282
Share on other sites

thanks guys, what do you think about these rims?

http://www.skylinesaustralia.com/forums/topic/369993-advan-rs-gun-metallic/page__p__5937826__hl__advan__fromsearch__1#entry5937826

would this size fit well or maybe these

http://www.skylinesaustralia.com/forums/topic/373540-lenso-rims-19x10-19-brand-new-rubber/

what are your guys oppinions about these rims and do you think they will fit on my car and look good (v35 coupe in silver)

thanks again

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5960371
Share on other sites

I have some very nice Enkei RP03's

http://www.discountwheelsource.com/wheel/wheel-brand-enkei/wheel-model-rp03/wheel-color-hyper-silver/wheel-style-five-spoke

Been having some dramas getting them to fit on my V36, they came form V35. Offsets after further research are very different.

May be for sale unless a little extra negative camber can get them to slip under the wheel arches better on the rears..

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5961015
Share on other sites

I have some very nice Enkei RP03's

http://www.discountw...tyle-five-spoke

Been having some dramas getting them to fit on my V36, they came form V35. Offsets after further research are very different.

May be for sale unless a little extra negative camber can get them to slip under the wheel arches better on the rears..

are you located in wa? also what are the sizes and offsets? i like the rim how much u think you will be after?

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5961152
Share on other sites

I got Axis Hiros 8.5 front with 245/40/19

and back 9.5 with 285/35/19

I have the exact same tyre and rim sizes, with a different tyre brand on my V35 Coupe, with standard ride height, and unknown (to me) offset, but the width simply appears to be "eaten up". They do not look that wide, and people are in disbelief when I point out just how wide the rear tyres are.

I found some uneven ground which pushed one of the rear tyres high up into the guard, and I could fit a finger width between the guard and the side of the tyre. I got the guards half rolled just to be safe under load and cornering.

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5962257
Share on other sites

what sort of rims do you like? 3,5 or multispoke? one piece forged or 2/3 piece dished? I'm contemplating getting a different set of wheels, so if the wheels on my car are to your liking, just throw me an offer. size is19 x 9 & 10 +25 f/r Work sc2

sky3.jpg

Edited by fcruz3r
Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5962342
Share on other sites

what sort of rims do you like? 3,5 or multispoke? one piece forged or 2/3 piece dished? I'm contemplating getting a different set of wheels, so if the wheels on my car are to your liking, just throw me an offer. size is19 x 9 & 10 +25 f/r Work sc2

sky3.jpg

hey mate im interested in a price for these thanks

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5967739
Share on other sites

i fitted some AME circular spec r to my v35 coupe yesterday... very dissapointed with the results.

am running 10x9 +15 and 19x10+15... needs lower offset as its quite sunken in the rear. All depends on what look your after tho.

I also have a full set of Racing Hart "cxr" rims in 19x10 +17 all around. these also fit fine front and rear.. however are for sale if any one is interested??

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5970841
Share on other sites

I have work sc2 20 x 8.5 & 9.5 +11 & +18. Guards are rolled and car is quite low on coilovers. Never had a prob. Even fully loaded never rubbed anywhere. If u wanna see some nuts fitments tho check these out

www.rimtuck.com/thumbnails.php?vehiclemake=Infiniti&vehiclemodel=G35+coupe&

Link to comment
https://www.sau.com.au/forums/topic/373609-rims-for-a-v35/#findComment-5979847
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...