Jump to content
SAU Community

Recommended Posts

hey guys, this is how it is, i own a r31 1989 sedan automatic rb30e non turbo.. 173000ks and owned by an old lady witha full service history.. The other day about 2 weeks ago someone put oil on a roundabout and i didnt know it was ther and went round it and the ass slid out and into the curb... Which bent my left axle and bent my pan hard rod, i went about fixing this through my mechanic. Now finding these parts were imposbile where i am so i bought a nissan pintara sedan 1989, gli.. And drove it back and donored the parts i needed into the skyline (pan hard rod, and the hole diff).. The mechanic installed it all for me.. I got the car back this wensday and it felt ok no vibrations or anythung, and last night (thursday) i was driving it to town 30ks and i went straight through a round about and on the exit it started to make a qiuet clicking noise, i pulled over straight away to examine and couldnt see anything visual, i proceeded to drive up the side street at a slow pace only to fine after 20p metres it got insanely worse insanely fast, i called a friend straight away who is a fully qaulified mechanic and he came to me and we drove it to his house and put it on the ramps.... ( we seen that the rear seal or something on the diff had been leaking a fair bit of fluid.. And these washer things near the unijoint closest to the auto looked f'd to hell) thats the story so far... If anyone can help me please, thank you jai

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...