Jump to content
SAU Community

Lakeside Raceway

IanB

By IanB,
in Events

 Share

Recommended Posts

IanB Veteran

IanB

Posted
Posted

Hi Guys

I am organising another day at lakeside for the 30th of August :)

Format of the day will consist of 5 groups of 5 - 6 cars, doing sprints (staggered starts). 1 out lap, 5 hot laps and 1 in lap, with each driver getting about 20 hot laps provided there are no mishaps on the day.

This event is capped at 30 cars maximum.

As per usual, AASA licenses and appropriate head to toe clothing is a must. Towing and Medical will also be available on the day.

The cost is $140, or $150 if paid on the day.

First come first served :) Those who are interested can contact me either here, or on 0400 813 419.

Regards,

Ian

Link to comment
https://www.sau.com.au/forums/topic/373950-lakeside-raceway/
Share on other sites
IanB Veteran

IanB

Posted
  • Author
Posted

Ian,

Can you give me some info about obtaining the AASA licence please...

Thanks

Mike.

Hey mate. To obtain the licence all you have to do is fill out a form. Day licences are available but they are not economic if you are going to be doing multiple events, in which case a years licence is $55.

IanB Veteran

IanB

Posted
  • Author
Posted

Hi everyone

I have finished putting together a small website for this event. It can be found at http://sprintbrisbane.dnsdynamic.com/Sprints.aspx

I have taken advantage of paypals API to provide credit card processing facilities for those who prefer not to do internet banking. It should also be a good place to go for further information about this event.

This event will make an excellent shakedown for anyone who is wanting to test prior to japnats. Cars on the track should be fairly minimal allowing you to get the most from your laps. There should never be any more then 6 cars on the track at a time.

Hey Ian,

I should be able to make the pushed back date. I will call you once I know for sure.

Cheers,

Ben.

No worries mate. Look forward to speaking to you :)

  • 2 weeks later...
yohoRB26 Apprentice

yohoRB26

Posted
Posted

Hi mate I havent been to a track day in Australia before and would love to get my r32 GTR out to see what its like at Lakeside. Is there any room left ? and what are the exact requirements for attending and driving- rules, regs etc. Also where to I obtain a licence for the day?

thanks

IanB Veteran

IanB

Posted
  • Author
Posted

Hi mate I havent been to a track day in Australia before and would love to get my r32 GTR out to see what its like at Lakeside. Is there any room left ? and what are the exact requirements for attending and driving- rules, regs etc. Also where to I obtain a licence for the day?

thanks

Hey yohoRB26

To obtain an AASA licence, all that is required is for you to fill out a form and to pay a small fee - There are two options available, a day licence which costs $25 and covers you for the day, or an annual fee of $55. I personally recommend people go for the yearly option as it is much better value for money.

The safety requirements are fairly basic. Obviously your vehicle must be in a safe condition, with no fluid leaks, particularly no oil leaks, but otherwise we have no special requirements for makings for battery, tow hook etc. On a personal note, you require a long sleeve shirt, full pants, and covered in shoes, along with a ADR approved helmet - otherwise, there are no requirements. The event is designed to be one which suits street cars, so mostly you just roll up, pay your fee, put on your helmet and on you go.

In regards to spots on the day, we should be able to accommodate you :)

If I can be of any further help, please ring me on 0400 813 419 or contact me via pm :)

Hope helps :)

Regards,

Ian

IanB Veteran

IanB

Posted
  • Author
Posted

Hey guys, here are the times for the day :)

Callum Whatmore - Onevia - 57.52

Grant Cooper - R32 GTR - 57.71

Jason Bridge - R33 GTR - 58.43

Ian Batley - R32 GTR - 59.61

Jesse Bridge - R33 GTR - 1.01.86

Tom Corbett - Porsche Cayman S 1.02.32

Tim Anson - Mazda MX5 - 1.02.35

Scott Mcinerney - Mitsubishi Evo 10 - 1.04.23

Ben Wormwald - Datsun 280ZX - 1.04.54

Michael Corbett - Renault Megane - 1.04.98

Matt Davey - Mazda MX5 - 1.05.48

Johanssan Femino - Nissan R32 GTR VSpec - 1.05.86

David Waddington - Nissan 180 SC - 1.06.16

Tim Kent - Mazda MX-5 1.07.4

Dominic Bou-Samra - RenaultSport Clio 18 - 1.07.94

Mal Whatmore - Nissan 200sx S14a - 1.07.96

Drew Austenberg - R34 Skyline GTT - 1.08.16

Ben Curran - Nissan Silvia S13 1.08.35

Clayton Buckland - Toyota Supra MK4 NA - 1.13.31

Vids to come...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...