Jump to content
SAU Community

Recommended Posts

Gunmetal Grey

Engine:

RB26DETT built by JHH Engineering

Wiseco 86.5mm forged pistons

Total Seal gapless rings

Tomei adjustable cam gears

Tomei 1.2mm metal head gasket + full Tomei gasket kit

Tomei oil restrictor

Tomei type B valve springs (head match ported)

ARP head studs

ARP rod bolts

ACL Race series bearings

Gates timing belt (brand new)

HKS 264/272 9.6mm Type B Spec cams

HKS 2530 turbos (match ported + std manifold match ported)

HKS stainless dump pipes (match ported)

Sard 720cc injectors

AEM adjustable fuel pressure regulator

Permacool fuel cooler

Greddy twin entry fuel rail

ARE Surge tank, half inch lines, 2 x Bosch 044s + Walbro 550HP lift pump

PWR 45mm radiator

CES 3.5” mandrel exhaust + front pipes

ARE 90mm intercooler + custom stainless piping

Greddy Type R BOV

Splitfire coils

Nismo 65 degree thermostat

High Energy Custom 6.5 litre baffled sump

Petersen Catch can

Earls external oil cooler + braided lines

Electronics:

Haltech E11V2

Eboost EBC

Hurst line-lock kit

Intercooler water spray

Omori gauge consol – oil temp/pressure + water temp

Nismo EGT

Nismo 260kph dash

Razo turbo timer

Suspension:

Bilsten Shocks with matched Whiteline F&R springs (Sydneykid's kit)

Whiteline front & rear sway bars

Adjustable front camber/castor kit

4:11 GTR rear diff and axles

Custom 2 piece tailshaft by Driveline Services

Custom rear cradle bushes

Cusco front & rear strut braces

Wheels:

Xyphos (Japan) 2 piece 17” x 8.0 front 17” x 8.5 rear

328 mm DBA 5000 series slotted rotors (front)

Brand new RDA slotted rotor (rear)

UAS caliper brackets (front)

A1RM pads front & rear

Braided ADR approved brake and clutch lines

Other:

Nissan GTR aluminium bonnet, N1 lip + bonnet latch

Nissan GTR grill

Nissan Front bar

N1 front bar vents

Greddy radiator deflector

R33 RB25DET gearbox

C’s shortshifter

NPC 1000HP rated twin plate clutch + flywheel

All fluids recently changed - car has easily run low 11's.

Modification plate also fitted by engineer.

http://www.carsales.com.au/all-cars/private/details.aspx?R=10997377&__Qpb=1&Cr=6&__Ns=pCar_RankSort_Int32|1||pCar_PriceSort_Decimal|1||pCar_Make_String|0||pCar_Model_String|0&keywords=&__No=15&__N=1216 1282 4294963846 4294963593 393 412 900 1466&silo=1011&PriceTo=412&seot=1&PriceFrom=393&tsrc=allcarhome&__Nne=15&trecs=26&__sid=12CE81DCAB24

Sau members $15500 ono.

Please contact me on 0423830508, Dan.

Link to comment
https://www.sau.com.au/forums/topic/374120-r32-gts-t-rb26/
Share on other sites



  • Similar Content

  • Latest Posts

    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
×
×
  • Create New...