Jump to content
SAU Community

Recommended Posts

either the button isnt tight on the stick, pull the bottom of the stick down and make sure the sirclip is in the correct spot.

or u have to have the key in the ignition and foot on the brake otherwise it wont move

yeah you need the ignition on and your foot on the brake pedal.

if thats not working, its probably the solenoid that activated the locking mechanism. there is a manual override next to the park position. pull out the little stopper and stick a screwdriver in the opening. it will release it

this is on an M35. C34 might be similar.

Hey thanks for the help guys. My foot is on the brake. I know I have to do that for the shift lock. On the c34 I can't see any manual release thing for a screw driver. I do know what they look like I've seen them on new cars. I am looking for it. Where is it? I have called mechanic b says it's electrical problem. Because I can hear the click sound when it unlocks but then it won't move dam it.

I DOUBT its an electrical fault.

The lockout for park on these cars runs off a PHYSICAL locking cable that runs from the shifter to the underside of the ignition barrel.

The cable up and to the left of the shifter in this car is the Lockout cable.... see how its been removed for manual conversion. Pull your centre console out and have a look to see if its still in place and then look under your barell to make sure its not causing issues for you.

http://www.skylinesaustralia.com/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=298844

Alrightey I fixed it. It was the ignition cable. Runs from the console to the ignition. I took off all the plastic under the steering wheel to trace the cable to the stick. Injust gave it a pull and it's fixed. I've played around with it and now it's better than before. Thank kidafa for that link and everyone else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HUMVEE are fine in big open areas, but they are problematic on the street and tight areas As for reliability, some of the  US Army guys I have chatted with have said that when they were working they were fine, but, the do spend alot of time in workshops for multiple reasons, admittedly, they did get a hard time by the boys and girls who drove them I would definitely put them in the "buyer beware" category  They do look tough as nails though 
    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
    • I don't have the OEM oil feed lines though and the turbo-wraparound line is torn, only has water. My plan is to get replacements for these and just connect a braided line to there. And make sure it's leak free. Hoses like these are also sometimes used to connect external wastegates, so for an EGR I think you're good using them.
×
×
  • Create New...