Jump to content
SAU Community

Recommended Posts

Thought id throw my car up for sale, see if there are any takers out there. Chasing 20k with everything! However i am definatly keen on swaps for a nice 32 GTST! :)

Here's the specs;

It's gunmetal grey with 103,000kms on the original RB26.

1991 R32 GTR

Engine and drive train -

- Original matching number engine (verified)

- R34 late model injectors

- Mines cast alloy angles with brand new 4.5" K&N filters (original air box inc)

- Custom made front mount oil cooler with earls braided lines. (also a custom made air-con condenser to fir next to the oil cooler)

- Genuine TRUST aftermarket front mount (confirmed)

- Custom Tuned ECU Tuned by RACEPACE, engine producing 420Hp (240wkw) which can be verified.

- Aftermarket 3" mandrel bent straight through exhaust with 4" cannon. Not too loud, lovely note. (Now running a 3" straight pipe, not too loud.. sounds insane on song still have the cannon)

- Trust Front Pipes 2.5" into 3" (installed @ 100,000km with fresh gaskets etc, no leaks)

- Nismo single plate clutch

- Very tight aftermarket 2-way diff (no noises)

Recent Maintenance:

- Coolant flushed and 3 hoses replaced (have recipts)

- Oil and filter changed every 3000km.

- Smurfs blood oil in the gearbox (replaced at 94000km)

- Front and Rear Diff's oil replaced with Redline (also replaced at 94000km)

Suspension / Braking:

- Full TEIN HA hight adjustable coil-over Suspension no leaks or knocks (Checked out @ pedders)

- Apexi N1 Evolution Pro Spec Coilovers 12kg front 10kg rears.

- Genuine Nissan OEM Lower Control Arm Inner and Outer Ball Joints Replaced @ 99000km (have recipts)

- Front and rear adjustable strut braces

- Original GTR brakes with the rear rotors replaced @ 93000km .. pull's up a treat.

- Tomei Brake Master Stopper

- HEL Braided Brake Lines front and rear fitted @ ~100,000

- HEL Braided Clutch Line fitted @ ~100,000

Interior:

- Factory GTR bucket seats

- Factory Speakers

- Alpine iPod compatible headunit + bluetooth etc etc

- Nardi steering wheel + boss kit

Exterior -

- GTR N1 front bar

- GTR N1 bonnet lip spoiler

- GTR N1 FRP Bootlip (Justjap copy) - proffesionaly paint matched and fitted by Cobalt Smash Repairs ~102,000kms

- Standard GTR side skirts, rear bar and wing

- Factory forged R32 GTR wheels in pretty good condition

- Enkei RPF1 18 x 9.5 +15 wrapped in Falken 595SS's

Car is in excellent condition, and must be seen to be truely appreciated! Any questions don't hesitate to contact me (PM / SMS). Happy to sell with original 32 GTR wheels and TIEN HA coilovers for ~18k if you would prefer.

LOCATED IN BRISBANE, QLD! - Contact; Willis: 0435120602.

I'm also interested in swaps for RWD Jap Cars, S13s, 14s, RX7 FCs, R32 GTST's, MX5s etc. Cash either way depending on the car obviously. SHOW ME WHAT YOU'VE GOT! smile.gif (I'm wanting to get into Drifting)

post-75263-0-33405300-1313907628_thumb.jpg

post-75263-0-58960500-1313907815_thumb.jpg

post-75263-0-53681800-1313907977_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/374739-qld-bnr32-gtr-gunmetal-grey/
Share on other sites

Mate, nice looking 32....

Good luck with sale..... You will need it... I've had mine on here for months with no result....

Dropped my price from 23k to 16,500....

No one is interested in 32's that arent around the 15-16 mark unless they've got massive kwatts.

Free advice mate......

Good luck with it....

Yeah i know hey, wankers. Power isn't everything hehe. I know the car market is slow, hoping that my availability with regards to swaps might be just what someone needs. Not many people don't have 20k for cars these days :P .. 10 on the other hand.. well :P

Pretty keen for a nice 32 GTS-t! :)

Btw, did you sell for 16.5k.. or still sitting on it?

Thanks for the PM mate, and yeah it's still running my old man's VIC rego. RWC will be supplied with the sale ofc. No GTS-t owners out there wanting an upgrade? :)

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...