Jump to content
SAU Community

R34 25Gt Getting New Exhaust!

crocophk

By crocophk,
in Engines & Forced Induction

 Share

Recommended Posts

crocophk Apprentice

crocophk

Posted
  • Author
Posted

thanks to all of u guys! im just planning to visit Carline exhaust at Gladesville tmr morning.

and anyone have an idea with MRT at Rhodes? one of ma mates said that place is good for tuning up but I couldnt find any info about exhaust at their internet site..

Jonno34 Mentor

Jonno34

Posted
Posted

I think most people go with a custom made one mate,

2.5" mandrel bent - dont forget to include a few mufflers to keep the noise level down! i've got a hot dog and a resonator as well as an oval muffler on the end.

congrats on the 34 :)

crocophk Apprentice

crocophk

Posted
  • Author
Posted

Just paid deposit to Carline at Gladesville, the total cost for changing muffler is $380. It is 2.25 cannon and straight. I tried to make it cheaper thats why i chose straight, not added bent pipe for good looking.. What do u guys think about the price? Reasonable or not?

ps MRT said $700 this morning.. just a muffler..I know they are good but..the price.....

crocophk Apprentice

crocophk

Posted
  • Author
Posted

Just paid deposit to Carline at Gladesville, the total cost for changing muffler is $380. It is 2.25 cannon and straight. I tried to make it cheaper thats why i chose straight, not added bent pipe for good looking.. What do u guys think about the price? Reasonable or not?<BR><BR><BR>ps MRT said $700 this morning.. just a muffler..I know they are good but..the price.....

Jonno34 Mentor

Jonno34

Posted
Posted

380 seems like a bit much just for a muffler change, im quite sure i paid around 200 for mine - but mine was a mild steel which is cheaper in general.

didn't you intend to change the whole system from the catback not just a muffler though?

crocophk Apprentice

crocophk

Posted
  • Author
Posted

I was going to get catback but just got penalties from RTA...... 2 penalties were around 400 altogether shit..

So I decided to change muffler only this time.. the muffler I chose was Japanese after market one so I dont wanna think about the price anymore haha........shit..

BTW Thanks to Jonno and 10 4!!

Take care with driving guys. Cheers!

Jonno34 Mentor

Jonno34

Posted
Posted

save the (nearly) 400 for the muffler and wait till you can afford a full cat back - should be about 1k for a custom made one, hell i picked up a second hand one for 120 bucks with everything i needed on!

Jonno34 Mentor

Jonno34

Posted
Posted

yeah tbh if i had the choice to change exhaust now i probably wouldnt do it again, especially if i bought the exhaust brand new.

as far as i can see theres not much if any noticeable difference in power, and it gets too loud at times even with all the mufflers ...

crocophk Apprentice

crocophk

Posted
  • Author
Posted

It was quite successful with changing only muffler.. the sound is still deep but as I see some comments, now i understand what u guys r talking about haha

Anyway, it was my first time to do somthing to my car. Thanks everyone! Cheers!

Jonno34 Mentor

Jonno34

Posted
Posted

no probs mate, as long as you're happy with what you did our opinions are irrelevant really

the muffler will after some weeks quieten down a little bit (in my experience they all have) and your ears will be infinitely more grateful :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...