Jump to content
SAU Community

R34 Gtt Rear Quarter Panel Gtr Conversion

sevan34

By sevan34,
in Exterior & Interior Styling

 Share

Recommended Posts

sevan34 Collaborator

sevan34

Posted
Posted (edited)

hii guys i was just wondering if anyone can help me im trying to convert my rear end with the gtr rear quarter panels and with the gtr rear bar which i will get from viva garage does anyone know if i can modify my nismo sideskirts to fit the rear panels and the front fenders or if i need to also get the gtr rear tailgate covers to ? i already have big wheels to fit on along with spacers ? anyone please help

Edited by sevan34
Jonno34 Mentor

Jonno34

Posted
Posted

i dont know if the vivagarage ones are for the gtr conversion... i think they may not be but im not 100%

they change the look and make em wider but pretty sure not gtr

Jonno34 Mentor

Jonno34

Posted
Posted

sevan: yes, the gt-r conversion is MONSTROUSLY costly, while the body parts themselves may not be overly so, the cost of fitting and spraying it is likely to double the cost of the parts, since the gt-r conversion covers almost all of the car.

I think its estimated at around 6k or so? you could do alot with 6k mate

Jonno34 Mentor

Jonno34

Posted
Posted

those are also really expensive, imo if you want a body kit just get something nice that was made for a gt-t, and if you want put a bonnet made for a gt-r on, and a mole to give the front that more round and aggressive look

sevan34 Collaborator

sevan34

Posted
  • Author
Posted

thanks for the help guys really appreciate it, this is my plan i wana buy the rear fenders and the rear impul rear bumper and get my side skirts modified to fit iv alrerady got monster sized wheels at 18 X 10.5 volk wheels and 38 mm rear spacers so it sits flush with the rear guards im quoted for the parts at $650 including shipping from viva garage and the guys i know quoted me $2200 fitted and sprayed (good mates of mine) is there anything else i should worry about before doing so or am i set for the job ?

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...