Jump to content
SAU Community

Recommended Posts

Hey guys, I am currently looking at selling my 1989 r32 4 door. Not sure whether to sell it or not so just testing the waters at this stage. It has been a great car, runs amazingly and really turns heads. Would be perfect for P-platers !!

It has:

Completely stock RB20DE engine 175 XXX Ks

Auto

Custom leatherette interior with nissan logo embroided on seats

VDO 6'' splits all round, VDO touchscreen dvd player headset, JVC 600w 4 chanel amp, 1200w pioneer sub

Rare 4 door side skirts

Type M front bar

Momo steering wheel

Undercar Led's (multi 7 colour with remote)

Blue Led's in front footwells and dash cluster

White Dash dial faces (put on the original dash)

Small tacho mounted next to cluster as the stock one is abit off

HKS fully adjustable coilovers

Cannon exhaust tip

Whitish aftermarket headlight bulbs

Fusion central locking and alarm

Comes with alloy stockies that have been sprays black

Can come with Silver driftteks for the right price

The bad:

Paint is very average in afew spots, could use a respray to get it looking A1

Afew scrapes/dints on the passenger side fender from being side swiped

A dint near the petrol cap which was there when i bought the car

Door trims need to be trimmed in same material as seats, havnt gotten around to it but material will be provided.

Also the temp guage stopped working

Other then that the car is a real beaut! I have loved this car for the two years i have owned it but i am after something manuel.

Message me if you have any questions.

Great car for P platers. Serious buyers only

$7,500 ONO

May accept swaps, throw me an offer!

(Pictures are from before the passenger side was damaged)

post-67206-0-00516600-1314959096_thumb.jpg

post-67206-0-73885400-1314959195_thumb.jpg

post-67206-0-28233200-1314959243_thumb.jpg

post-67206-0-21767400-1314959288_thumb.jpg

post-67206-0-55254600-1314959364_thumb.jpg

post-67206-0-36712500-1314959385_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/376039-eoi-r32-4-door-non-turbo/
Share on other sites

  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

> You're asking $7500 without the Drifteks?

> Mind uploading a few photos of the passenger-side 'dints' & petrol-cap 'dint' please?

> How long has the temperature gauge been broken?

> Wouldn't mind photo of boot interior and the amp/sub — have they been thrashed?

> How much tread on tyres?

> Are the speakers, amp and Sub all in good condition? Part of what makes this so appealing is the already-featured beatz, saves ~ $1100 that I'd have to spend if I were to do it myself.

Reason for so many questions: I'm based in Melbourne — never bought from SAU either, so I'm a tad skeptical.

Thanks.

Edited by cev

Hey mate, decided to go $7500 with drifteks now

The speakers are all in great working order, the bass isnt turned up too loud so it hasnt been smashed. Sub and amp are only about a year old and the speakers are about a year and a half old.

The temp guage only stopped working about a month ago.

Tires still have plenty of tread

will put pics up in a minute

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...