Jump to content
SAU Community

Recommended Posts

So I'm in the market for some new oil pump gears, I was going to get some JPC items but after discussions on the phone this morning, they are out of stock for another week or so.

I also queried the different sizes of gears and the guy said he wasn't aware of different sizes..

So I jumped on RHDJapan as I recalled seeing them specifiy two different OD's of gears and they only want AU$430 delivered for the Reimax gears while the JPC gears are AU$370+postage...

Which ones should I go for?

Link to comment
https://www.sau.com.au/forums/topic/376478-reimax-or-jpc-oil-pump-gears/
Share on other sites

A week & 60 bucks is neither here nor there.

Which pump do you have - the Reimax ones are for the stock & N1 pumps - different sizes for different pumps.

By the sounds of it the local offering is for a stock pump?

Edited by djr81

Currently an RB30E pump but I have an N1 pump as well which is what I was going to put the gears in (neither JPC or Reimax do RB30 gears). The info on RHDJapan says there are two sizes of Reimax gears, both for the N1 pump but there is an early (bigger OD) and a later (smaller OD) version.

Yeah a week and $60 is neither here nor there, so that's why I'm torn with which way to go and I guess I am looking for peoples experiences with either.

Currently an RB30E pump but I have an N1 pump as well which is what I was going to put the gears in (neither JPC or Reimax do RB30 gears). The info on RHDJapan says there are two sizes of Reimax gears, both for the N1 pump but there is an early (bigger OD) and a later (smaller OD) version.

Yeah a week and $60 is neither here nor there, so that's why I'm torn with which way to go and I guess I am looking for peoples experiences with either.

Um, is there?

As far as I know (& I could be wrong) there are two different crank drives for the pump - the early R32 (Pre August 91 perhaps) being the least strong.

The OD of the N1 & stock pumps is different the stock somewhat perversely being larger than the N1.

I wasnt aware that the outside diameter of say a stock pump changed over the life of the RB26 but I could be wrong.

No, the OD of the N1 pumps, they state an early (81mm) and a later (77mm), the later being the same size as normal RB26 pumps.

http://www.rhdjapan.com/reimax-oil-pump-gear-kit-skyline-gt-r-rb26dett-54021

Try here & go to the reimax oil bits.

http://www.greenline.jp

They list different thicknesses & diameters. I am not at all sure the RHD Japan site is entirely correct in what they are saying.

Maybe this is the same as the all pumps are now N1 rumour?

Edited by djr81

The thicker ones are the Reimax Capacity Up gears that you have to send them your housing to have them fitted in to, RHDJapland list them separately: http://www.rhdjapan.com/reimax-reinforced-and-capacity-up-oil-pump-gear-kit-skyline-gt-r-rb26dett-59391

I guess this is why I'm leaning towards the Reimax gears over the JPC as the JPC guy said he wasn't aware of any size differences with the N1 pumps and that's why they moved to the N1 over the RB30E/T.

No, the OD of the N1 pumps, they state an early (81mm) and a later (77mm), the later being the same size as normal RB26 pumps.

http://www.rhdjapan....-rb26dett-54021

Isn't it the other way around? N1 pump 77mm gears with assymetric tooth profile, factory RB26 81mm gears with symmetric profile, almost duocentric?

post-36390-0-47688800-1315380209_thumb.jpg

No first hand experience with either of them, but why would oyu want smaller gears with thin metal? Isn't it better to just put 81mm reimax gears into a RB26 pump? It has a good 2mm extra metal for each gear, so IMO is less prone to breaking.

No first hand experience with either of them, but why would oyu want smaller gears with thin metal? Isn't it better to just put 81mm reimax gears into a RB26 pump? It has a good 2mm extra metal for each gear, so IMO is less prone to breaking.

Are their really that many reports of billet gears breaking? Certainly much fewer than sintered gear N1 pumps.

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...