Jump to content
SAU Community

Recommended Posts

Have the following parts left over after the sale of my 32 GTR -

1 x Full set of Agreve (Japanese brand) Damper and Circlip Height Adjustable shocks, brand new in the box, only opened to trial fit springs to 2 shocks. $250 bargain.

1 x Whiteline front Camber kit, suit R32 GTR, part #KCA328, brand new in packaging (opened but never fitted) $120

1 x Pair of M's pod filters/adaptors for RB26 $50 + postage

1 x Pair of stock R32 GTR RB26 cams, good condition (came out of my motor to fit Tomei cams) $200

1 x R32 GTR RB26 Crank Angle Sensor, working fine when removed (I put a 34 CAS in mine to suit the 34 Tomei cams) $50

1 x SX Fuel Pressure Regulator, purple, can get model # off it...was on my car working perfect when I bought it but took it off as I was going bigger injectors, comes with Speedflow fitting for the stock rail $200

1 x Full set of S15 200SX 16x7 stock rims in perfect nick, tires fitted but pretty much shagged, good for burnouts...$150

1 x Stainless rear muffler (barrel style) marked underneath but good condition otherwise, 5" tip, short length of 3" pipe welded on the inlet end $40

All parts are plus postage for interstate buyers, happy for SA guys to pickup.

0400 274 366.

Edited by NSNPWR
  • 2 weeks later...
  • 5 months later...

Have the following parts left over after the sale of my 32 GTR -

1 x Full set of Agreve (Japanese brand) Damper and Circlip Height Adjustable shocks, brand new in the box, only opened to trial fit springs to 2 of the shocks. $200 - bargain.

1 x Whiteline front Camber kit, suit R32 GTR, part #KCA328, brand new in packaging (opened but never fitted) $100

1 x Pair of stock R32 GTR RB26 cams, good condition (came out of my motor to fit Tomei cams) $90

1 x R32 GTR RB26 Crank Angle Sensor, working perfect when removed (I put a 34 CAS in mine to suit the 34 Tomei cams) $50

1 x Full set of S15 200SX 16x7 stock alloys, perfect nick, Federal tires fitted but pretty much shagged, good for burnouts...$150

1 x Stainless rear muffler (barrel style) marked underneath but good condition otherwise, 5" tip, short length of 3" pipe welded on the inlet end $40

All parts are plus postage for interstate buyers, happy for SA guys to pickup.

0400 274 366.

Items and prices updated.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...