Jump to content
SAU Community

Recommended Posts

Hello every1,

Im interested in a car which is located in Perth and I live in Sydney.

I was hoping to get advice on any companies which transport cars from Perth to Sydney and a rough idea on cost if anyone knows.

Thanx.

Your best bet would be to look at transporting companies man.

costs can range from 900 up to 1600 depending on which comapny you use. You can enter the details of your car on most company web pages and they generate a quote

http://www.automove.com.au/?gclid=CLDHlZuolasCFc0F4god0XhAsw

http://www.movingcars.com.au/

http://www.carcarrying.com.au/

http://cevacarcarrying.com.au/

i have used Ceva several times now. the thing you have to remember most will use the train so the do get dirty. Most places give the car a wash before you pick it up but in saying that if its a nice car i would tell them not too the wash it myself on the way home.

Ceva cost us around $1100 from Melb to Perth as an idea, that was door to door.

Thanx 4 the info. Its a r34 gtr I dont mind if it gets dirty as long as it doesnt get scratched or dented on the way. Did any of ur cars get damaged at all?

I'd be worried about the front vspec diffuser if they are getting it on / off numerous forms of transport as they sit quite low. Do u kno if this would be a issue?

Thanx again.

depends on the driver at the time. My 32 was lower than standard but still way above legal. I had a few small rub marks but nothing a cut and polish wouldnt fix. They are insured just make sure that who ever is at this end gets all the marks (if any) on the pickup form and you have a copy when you get the car. This way if there is any new marks you have proof.

I used Ceva Logistics to move a my car from Perth to Sydney.

Took about two weeks (maximum) and car was in great shape. They noted any marks before it went on the truck and double checked them and ran through them with me when I came to pick it up.

They don't do door to door but it depends, I had to use Ceva because my car was too low, drop it off at Welshpool in Perth and pick it up at Villawood in Sydney.

Work paid for the shipping of my car but it was around $900 from what I remember, however, I got it a little cheaper than usual because I was using a Courier company to relocate so they did a better price. (Allied Pickfords)

Hope that helps mate, good luck.

yeah I used CEVA a few times, pay a bit extra for the premium or race car service for cars too low to go up the ramps of the trucks, and it goes into a container at one end and doesn't come til the other..it was only a couple hundred more..thumbsup.gif

I received the quote from Ceva 2day for gtr transport.

VehiclesNISSAN SKYLINEQuote Charges:AUD 3330.65GST:AUD 333.07Total Charges:AUD 3663.72

Unfortunately this is a bit much for me, so will wait for 1 to pop up closer to this side of the country.

Thanks 4 all ur help guys.

My god, thats an insane Price. Would be cheaper for you to pick it up in Melbourne and then drive back the NSW. , Better yet, would be cheaper if you take a plain to Perth, and drive it back too. :thumbsup:

Damn, that's a lot. Just for reference, here is a quote that I just ran through there website for my GTR from the Perth Depot to Melbourne Depot

cevaquote.jpg

Hello, thanks 4 that. Yes, standard service is much cheaper but they said because of the ride height it has to go through their premium / race service only as they need a trailer with hydrolic lifters to get it on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Omg Brake pedal removal.. FML!!
    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
×
×
  • Create New...