Jump to content
SAU Community

Recommended Posts

For sale:

A pair of R33 Skyline Headlights out of a GTST Series 1.

I brought a new pair and these were what got replaced. Driver side headlight has had a crack in the plastic housing (not the clear plastic) but this has been sealed up. Nothing else is wrong with it, that's how it was when I brought the car and I replaced the headlights due to being fussy.

Nothing else too major to worry about, both headlights are a little yellow, nothing a polish won't fix. I'll confirm anything else I find about them tomorrow when its daylight, including posting up some pictures. Only asking $100 for the pair, need them out of my shed!

RB25DET Viscous clutch and fan $40

R33 Series 1 GTST Front and Rear seats. $50 & $40

R33 Series 1 Steering wheel $40 (One with the " S " on the middle. No air bag)

(Currently taken apart in attempt to make the horn press in better, & will assemble it back completely for anyone who wants it.)

What I believe to be a R34 ECU and engine loom

$70 for ECU and $70 for the loom

(It's missing a few plugs off the loom and I'll confirm with photos and model numbers what exact loom and ECU it is.)

An R33 or R34 alternator. (No idea which one it is, I'll post up some photos.) $50

180sx crank angle sensor $50

Also have the bottom half of a RB25DET engine/block. Might keep it for now, yet won't refuse a reasonable offer. Feel free to ask any question about this, I really have no idea what I'm looking at. All my knowledge is in the top half of the engine. :P

I'm located in Melbourne, Burwood, cash on pick up would be great. Contact me on: 0409 767 893 (Text only please as I'm at University during the week, feel free to call me during weekends at any possible hour.) Email: [email protected] or PM me on here.

Also a few of these are on eBay

Will swap anything above for a RB25DET stock intake plenum (must have the bottom half!) or a RB25DET cas/cam sensor, a working car head unit so I can actually have radio again, any type of turbo timer or boost controller. Or just offer me some more Skyline parts.

post-86488-0-46608300-1316440569_thumb.jpg post-86488-0-11671500-1316440616_thumb.jpg post-86488-0-29417400-1316440655_thumb.jpg

post-86488-0-96505000-1316440683_thumb.jpg post-86488-0-29182100-1316440707_thumb.jpg post-86488-0-37799300-1316440730_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/377710-lots-of-r33-parts-other-bits/
Share on other sites

For sale:

A pair of R33 Skyline Headlights out of a GTST Series 1.

I brought a new pair and these were what got replaced. Driver side headlight has had a crack in the plastic housing (not the clear plastic) but this has been sealed up. Nothing else is wrong with it, that's how it was when I brought the car and I replaced the headlights due to being fussy.

Nothing else too major to worry about, both headlights are a little yellow, nothing a polish won't fix. I'll confirm anything else I find about them tomorrow when its daylight, including posting up some pictures. Only asking $100 for the pair, need them out of my shed!

RB25DET Viscous clutch and fan $40

R33 Series 1 GTST Front and Rear seats. $50 & $40

R33 Series 1 Steering wheel $40 (One with the " S " on the middle. No air bag)

(Currently taken apart in attempt to make the horn press in better, & will assemble it back completely for anyone who wants it.)

What I believe to be a R34 ECU and engine loom

$70 for ECU and $70 for the loom

(It's missing a few plugs off the loom and I'll confirm with photos and model numbers what exact loom and ECU it is.)

An R33 or R34 alternator. (No idea which one it is, I'll post up some photos.) $50

180sx crank angle sensor $50

Also have the bottom half of a RB25DET engine/block. Might keep it for now, yet won't refuse a reasonable offer. Feel free to ask any question about this, I really have no idea what I'm looking at. All my knowledge is in the top half of the engine. :P

I'm located in Melbourne, Burwood, cash on pick up would be great. Contact me on: 0409 767 893 (Text only please as I'm at University during the week, feel free to call me during weekends at any possible hour.) Email: [email protected] or PM me on here.

Also a few of these are on eBay

Will swap anything above for a RB25DET stock intake plenum (must have the bottom half!) or a RB25DET cas/cam sensor, a working car head unit so I can actually have radio again, any type of turbo timer or boost controller. Or just offer me some more Skyline parts.

post-86488-0-46608300-1316440569_thumb.jpg post-86488-0-11671500-1316440616_thumb.jpg post-86488-0-29417400-1316440655_thumb.jpg

post-86488-0-96505000-1316440683_thumb.jpg post-86488-0-29182100-1316440707_thumb.jpg post-86488-0-37799300-1316440730_thumb.jpg

Hey mate, pity your not in SA, I would love a new front seat, mine has a rip and some stains... but id assume courier would cost just as much as the seat itself..

I could find out some prices for you? Although the seat in my photo with the wearing is the drivers side. :(

Oh okay, mines worse exposing the metal bit, thanks anyways ill keep looking and let ya know :)

Here is a photo of the ECU and loom that I have. Actual photo taken by me, no idea what car it's off. Please help me out. :P

http://imageshack.us/photo/my-images/192/img20110923003628.jpg/

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...