Jump to content
SAU Community

Eoi: S14, 100% Ready For Rb25

soturi
 Share

Recommended Posts

soturi Community Regular

soturi

Posted
Posted (edited)

Hey guys, so i have a 1994 model s14 forsale.....only reason for selling is a change in direction of hobbies for a while.....if i can't get around the price i wanted i will just put it in my parents shed and keep it for later....

100% defect free

Can come with rego

Can come with blueslip

it is out of rego atm though.

Make it your track weapon, or if you got the minerals, drive it on the street like i did ;D

I will try my best to get pics up today>

Either way, list of gear that will come with car....

13xxxx on shell

1994 s14a shell, with s2 face lift

The car is a dark purple (will see in pics)

dmax widebody (moulded)

weds? 18x10.5 -9 ® 18x9.5 -11 (f) (they look like work vs-xx) (some gutter rash, ive been "told" all repairable)

slotted front rotors

BC coilovers, less then 1000km travelled

Has a couple of rear adjustable arms (JJR)

Front strutbrace

Battery is brand new, relocated to boot, all new terminals.

Brand new Deastchwerks 300lph intank pump (new relay and power pick up from boot, 0 voltage drop)

Alpine headunit

sound stream 6x9s

sound stream splits up front

fusion 4 channel 600w amp

s15 front and rear leather seats,

s15 steeringwheel

nismo gearknob

boost/oil pressure gauges

ABS has been deleted

Custom gearbox mount to suit rb25 gearbox

Custom tailshaft to suit rb25 gearbox

Custom bracket for clutch master so pedal feel is absolutely perfect. (no conversion woes)

r33 crossmember

r33 engine mounts

r33 clutch master cylinder

r32 gtr clutch slave cylinder (with braided line)

Full 3 inch dump/front to suit this set up, 3 inch cat, 3 inch cat back with a twin tip (i think xforce) muffler.....it is pretty loud im not going to lie...but you can keep it quiet if you know how to drive.

Nothing in this section will be seperated.

Car is also wired,so pretty much, get your motor, a z32, a powerfc, you can tune the car, it will start as soon as you plug it all in.

Located in Narellan NSW 2567

Price: im going to say $10000 everything above this line purely as a ballpark figure so thread doesnt get locked

_________________________________________________________________________________________________________________________________________

now i have alot of "extras" so to speak..

If you are interested in the car, you will most likely be interested in alot of these....

genuine greddy plenum (less then 1000km)

6boost highmount manifold (less then 1000km)

genuine garrett 3076r .82 rear housing (less then 1000km)

turbosmart 50mm progate (less then 1000km)

turbosmart bov (unsure of model, can be plumbed back though)

turbosmart FPR 800 fuel pressure reg (with braided line) (less then 1000km)

custom polished fuel rail to suit top feed injectors onto greddy plenum (with braided line)

700cc SARD top feed injectors

apexi powerfc with handcontroller

z32 afm with plug

full aluminium intercooling piping kit, all custom to suit

4 inch aluminium custom intake pipe

custom polished catchcan with hidden breather

ebay 52mm alloy radiator (less then 1000km)

Twin 12 inch thermos (less then 1000km)

small alloy overflow bottle

Justjap intercooler core (600x300x76) (less then 1000km)

rb26 rockercovers powder coated in wrinkle black (includes clear timing cover with hole drilled out to fit VCT)

Now as the car is still running, this isnt going to be ready to be parted this weekend....it probably wont be ready until next month.

I will only part it once i have recieved a decent deposit for the rolling shell. Obviously the buyer of the shell would be interested in alot of the smaller parts as this would make life very easy.

Im hoping mods will just let me list the extras without prices, as i dont want to put prices yet, as i wont have the items off for some time. I would like to give the shell buyer preference also.

Im going to try my best to get pics up this morning. If not, PM me your phone number and i will sms you any picture you would like..

Cheers for your time

Aiden

Edited by soturi
Link to comment
https://www.sau.com.au/forums/topic/378100-eoi-s14-100-ready-for-rb25/
Share on other sites
  • 2 months later...
  • 3 weeks later...
  • 2 weeks later...
soturi Community Regular

soturi

Posted
  • Author
Posted

Yeah it was for an r32 gtr - twin core>

genuine greddy plenum (less then 1000km) $1100

6boost highmount manifold (less then 1000km) $950

genuine garrett 3076r .82 rear housing (less then 1000km) $1500

turbosmart 50mm progate (less then 1000km) $600

turbosmart bov $225

turbosmart FPR 800 fuel pressure reg (with braided line) (less then 1000km) $200

custom polished fuel rail to suit top feed injectors onto greddy plenum (with braided line) $150

700cc SARD top feed injectors $600

custom polished catchcan with hidden breather $200

ebay 52mm alloy radiator twin core (less then 1000km) $150

Twin 12 inch thermos (less then 1000km) $100

small alloy overflow bottle $50

rb26 rockercovers powder coated in wrinkle black (includes clear timing cover with hole drilled out to fit VCT) $300

I think the prices are pretty fair, pics up soonish

pm meeeeeeeee

Pick up in arncliffe area preferred

urtwhistle Proficient

urtwhistle

Posted
Posted

Will you be interested in packing it and dispatching it to WA? IE if your work uses many couriers or freight companies. I could organise for it to be picked up directly as long as you packed it. Is the manifold a standard T3? once I get my car back from the shop with there diagnosis I'll send you a message and see if you still have it. PM me if you want.

regards

Chris

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...