Jump to content
SAU Community

Recommended Posts

ok so i hooked up an 'ECU TALK' to my r32 gtst and i have found that when the car is cold the ignition timing is out...

it goes from the normal 15*btdc at idle to 7* btdc up tp around 2800rpm then starts working as normal from there to red line.

once the car gets warm it stops and i dont experiance it until the car is stone cold again. i just replaced the coilpacks with splitfires

and it still happens so thats no the issue

my question is what could be causeing this? crank angle sensor? i recently did the timing belt and everything was sweet and looked in order

cheers for the help

Link to comment
https://www.sau.com.au/forums/topic/378310-ignition-issue/
Share on other sites

ok so i hooked up an 'ECU TALK' to my r32 gtst and i have found that when the car is cold the ignition timing is out...

it goes from the normal 15*btdc at idle to 7* btdc up tp around 2800rpm then starts working as normal from there to red line.

once the car gets warm it stops and i dont experiance it until the car is stone cold again. i just replaced the coilpacks with splitfires

and it still happens so thats no the issue

my question is what could be causeing this? crank angle sensor? i recently did the timing belt and everything was sweet and looked in order

cheers for the help

Its commanding that value - therefore its in the tune.

I believe its a catalyst warm up function. I've havn't disassembled these ECU's enough to find where it requests the retard from but I'm guessing its a single signed 8-bit value added to the main table.

Link to comment
https://www.sau.com.au/forums/topic/378310-ignition-issue/#findComment-6032800
Share on other sites

I concur. I had always thought that the standard tune locked in 15° until it was warm. On my car, pretty much the instant the temp gauge made it to the centre of scale you can feel the timing unlock and it gives a tiny little jump. Doughy before that and normal afterwards. As carns says, you can adjust this with Nistune.

Link to comment
https://www.sau.com.au/forums/topic/378310-ignition-issue/#findComment-6033525
Share on other sites

standard they pull shitloads of timing so just needs a retune with nistune or something. Can make the car drive pretty shit when cold once you start modifying stuff.

yeah i have found that ot goes like a sack of shit when its coldish, i do need to take it to get tuned cause it didnt get a full tune in the first place because of coil pack failure :(

just got to put my front mount on and she will be ready for the tuners :)

but this shouldnt damage my engine if i drive it like this until then?

Link to comment
https://www.sau.com.au/forums/topic/378310-ignition-issue/#findComment-6034186
Share on other sites

It's actually better for it to run low timing numbers while it warms up. a) it helps warm it up faster, b) it stops you from driving it hard until it has at least a little heat in it. The only reason to adjust it is if it is being a complete pig because of being modified away from where the Nissan methods works. If it's just being a little doughy then best leave it as it is. My car is basically stock (injectors and turbo are stock), so it still behaves more or less as Nissan intended. My temp gauge comes up to mid scale after just a few minutes of driving if I drive straight off from a cold start. That's where the cold start retard ends. That's OK with me. So I didn't bother changing it when I tuned the ECU.

Edited by GTSBoy
Link to comment
https://www.sau.com.au/forums/topic/378310-ignition-issue/#findComment-6034218
Share on other sites

yeah mines a pig lol a truck taking off from the lights is the same acceleration speed lol

i have exhaust, ARC intake, ARC side mount, turbo back exhaust, blah blah blah lol so maby

i should get it all sorted when i get it re tuned :)

Link to comment
https://www.sau.com.au/forums/topic/378310-ignition-issue/#findComment-6034229
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...