Jump to content
SAU Community

Recommended Posts

Hey All,

As everyone probably knows, I'm wrecking my R33 GTST, after it's little roll. Have been away so haven't had time to do much with it till now;

Bits that have been sold:

Exhaust

Rear bumper

some dash parts

floor mats\ash tray

injectors

afm

ecu

Engine\gearbox have been spoken for but waiting to finalise to may be up for sale again later.

Bits that are damaged:

lower control arm LHS

windscreen

no front bar

radiator\clutch fan etc

Extra parts for sale:

Brand new KYB gas shocks to suit R33 GTST, front and back.

Jim Berry 4000lb full monty clutch to suit R33 GTST

R33 stock LSD

Black front bar, has some damage "mspec"

Please let me know if you are after anything\need anymore info on what's in it etc.

Email: [email protected]

Mobile: 0407884138

Link to comment
https://www.sau.com.au/forums/topic/379163-wrecking-r33-gtst-series-15-1995/
Share on other sites

Hi mate,

after prices on the following if u still have it:

rear sill panel or just the speaker covers

RHS window control switch & Surround

RHS interior door opener surround

RHS & LHS plastic guard liners

Front & Rear wiper arms

RHS front seat or pair

Center Console Rear section

Boot trims/carpet

Cheers mate

Smithy

0447 527 480

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...