Jump to content
SAU Community

Recommended Posts

Hi guys,

I am wanting to get a different BOV but i want the flutter sound valve not the typical whossshh. What are the names and models of any flutter sounding BOV's that you guys know of. And if any of you have one are you willing to swap for an HKS BOV?

your help is much appreciated,

Thanks

JL

Link to comment
https://www.sau.com.au/forums/topic/37919-bovs/
Share on other sites

I never knew u could buy BOV's which make the flutter sound

ive got a factory bov with an fmic and i get the flutter....pretty sure its only the fmic which makes that noise

Or by removing something around your turbo so air hits it harder or against the wastegate ??? which creates the flutter...

Link to comment
https://www.sau.com.au/forums/topic/37919-bovs/#findComment-763682
Share on other sites

shouldnt cause to much damage

thats same sort of principle for VLs when they wake on a cooler and get flutter

my turbo is still in good nick and thats running some high boost as well

but then again stock skyline turbos r made from pottery clay :-p so i wouldnt really risk it..

nick lets test it on urs :-)

Link to comment
https://www.sau.com.au/forums/topic/37919-bovs/#findComment-763750
Share on other sites

Get a BOV, plumb it back, and get performance out of your car.

I think he's more concerned about the noise his car makes rather than the performance of the thing. :D

runnning no BOV hinders performance... u serious??? haha

Dead serious...... what are you laughing at?

:slap:

Link to comment
https://www.sau.com.au/forums/topic/37919-bovs/#findComment-763838
Share on other sites

*sigh*

well from memory a BOV unless running high boost is not going to improve performance on anything... infact im pretty sure in one of my speed mags where they had a 4 page spread on them and what they do they are only designed to release pressure to extend the life of your turbo.

Link to comment
https://www.sau.com.au/forums/topic/37919-bovs/#findComment-763900
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...