Jump to content
SAU Community

Recommended Posts

2x HKS 25/40 Turbo's off an RB26 complete with 1 bar actuators. The plate on the turbo says GT2540-46T and below that is 446179-17. One is in perfect condition and the other needs to be rebuilt with new bearings and seals. WILL NOT Seperate, only selling as a pair... PRICE FOR BOTH: $1150 ono

Chipped & Tuned ECU for a R33 GTR Skyline by Electrical Magic Charge in Japan... it has been used previously! Not by me, i bought it off a friend who had it laying around... PRICE: $150 ono post-64667-1754461_thumb.jpg

HKS F-Con V ECU (Fuel & Ignition Timing) for a R32 GTR Nissan Skyline complete with patch harness... it has been used previously, i havent used it myself, i got it off of a friend! PRICE: $250ono

Apexi Rev/Speed Meter which includes 0-100-400 time/switch control... PRICE: $180ono

Call me if your interested... i only know as much about these items as what i have listed so far!! Located in Sydney, near Hurstville Joel 0421 503 250

Edited by LU57IN
Link to comment
https://www.sau.com.au/forums/topic/379658-parts-for-sale-garage-clean-out/
Share on other sites

For anyone intending to buy the HKS F-Con V-Pro (if it is the Pro) ECU in Sydney, the recommended places that'll help you tune your car with it are...

* Tune House at Marrickville

* Dart Automotive at Punchbowl

Hope this helps...

Thanx for that Terry :)

The rev speed meter has a Black Face, the serial number sticker has a mounting plate over it but the only numbers i can see are: RSM 9606!! Cheers

Yes i've been told by a mechanic they are okay for a standard RB26 and they bolt up to standard manifold/dumps... just so your aware, one needs to be rebuilt! i can post, it'll be around $70 if your in ACT!

Turbo's are SOLD!!!

Payment pending on the HKS F-Con V ECU!!!

I also have Apexi (FC Commander) Hand Controllers FOR SALE @ $250ono....They have been used previously, but are still in good, working condition!!

33 GTR ECU is SOLD!!!

STill For SALE:

1. Apexi RevSpeedMeter = $170ono

2. Apexi FC Commander (Hand Controller) = $250ono

3. R34 GTR V-Spec 2 Nur- standard ECU including the facotry boost solenoid = $300ono

4. Apexi Power FC (ECU) & Apexi Hand Controller to suit a R34 GTR = $960ono

  • 4 weeks later...

STill For SALE:

1. Apexi RevSpeedMeter = $1490ono

2. Apexi FC Commander (Hand Controller) = $249ono

3. R34 GTR V-Spec 2 Nur- standard ECU including the facotry boost solenoid = $300ono

4. Apexi Power FC (ECU) & Apexi Hand Controller to suit a R34 GTR = $960ono

Apexi RSM (Rev Speed Meter) is SOLD!!!

1. Apexi Power FC (ECU) & Apexi Hand Controller to suit a R34 GTR = $960ono:

post-64667-0-06256100-1324455157_thumb.jpg

2. Apexi FC Commander (Hand Controller) = $249ono:

post-64667-0-99707700-1324455253_thumb.jpg

3. R34 GTR V-Spec 2 Nur- standard ECU including the facotry boost solenoid = $300ono

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...